Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)
-   -   [FTC]: 121 Autonomous (http://www.chiefdelphi.com/forums/showthread.php?t=75566)

gregsanCHEVY121 06-03-2009 22:37

[FTC]: 121 Autonomous
 
Here is a sample of our autonomous. It gets two racks then scores them, check it out. Let us know what you think
http://www.youtube.com/watch?v=_xQszAir01k

gdo 07-03-2009 19:55

Re: [FTC]: 121 Autonomous
 
I have a feeling that RI went very well for you guys today...

dooey100 07-03-2009 21:07

Re: [FTC]: 121 Autonomous
 
Very impressive! But aren't you worried about running into the other robots if they try any autonomous? Or are you using the sonar to look for other robots?

ttldomination 07-03-2009 21:56

Re: [FTC]: 121 Autonomous
 
Yeah. I feel that there is too much room for error. If you run into something and if you are using encoder counts, the exact distances will be different on the field.

Personally, one which scores one at a time has more insurance.

None the less. SO good.

craig_yates 07-03-2009 22:56

Re: [FTC]: 121 Autonomous
 
We used light sensors to pick up the racks. True, there is room for error over the entire program, but "one which scores one at a time" in auto will never have a remote possability of scoring 190 points in auto. We made an auto that got one rack, and then we made this one.

Rick TYler 08-03-2009 01:47

Re: [FTC]: 121 Autonomous
 
Quote:

Originally Posted by craig_yates (Post 832944)
"one which scores one at a time" in auto will never have a remote possability of scoring 190 points in auto.

How do you score 190 points in auto? 32 pucks in the racks plus 3 on the robots is 35 total pucks times a maximum of 5 points each is 165 points. Even if you had both robots drive up ramps in auto, you still don't get 190. How do you get to 190 autonomous points?

emmell 08-03-2009 09:58

Re: [FTC]: 121 Autonomous
 
If they're scored in autonomous and not de-scored during the rest of the match, the pucks will be counted a second time. So, 165 + 165 for pucks. 25 for clearing the racks. 20 for getting both robots off the field. Max score for a team is 375 points.

ttldomination 08-03-2009 10:10

Re: [FTC]: 121 Autonomous
 
The possibility is not remote. It's just more likely that you will get at least one rack, rather that not get any at all. And then at world, where almost ever single robot will be moving, running into someone might be a big issue.

Overyourhead 08-03-2009 10:25

Re: [FTC]: 121 Autonomous
 
I saw this Auto in the finals at the RI regional. It was pretty sick. It was awesome teaming up with you guys again!

BradMello 11-03-2009 23:56

Re: [FTC]: 121 Autonomous
 
Quote:

Originally Posted by Overyourhead (Post 833025)
I saw this Auto in the finals at the RI regional. It was pretty sick. It was awesome teaming up with you guys again!

Yeah, we had to try and run it at least once hahah:)

nice winning with you guys, great finals round

Nitro-Guy 20-03-2009 19:09

Re: [FTC]: 121 Autonomous
 
Nice job... looking forward to seeing you folks in Atlanta.

-Jonathan

basicxman 21-03-2009 18:45

Re: [FTC]: 121 Autonomous
 
Crazy good, I'd recommend hooking up some ultrasonics for avoidance techniques, while avoiding a robot, keep track of the encoders, and then do the reverse movements :P

ttldomination 21-03-2009 23:25

Re: [FTC]: 121 Autonomous
 
Hey..Andy..No giving people my ideas. :D.

chopperdudes 21-03-2009 23:42

Re: [FTC]: 121 Autonomous
 
Quote:

Originally Posted by ttldomination (Post 838951)
Hey..Andy..No giving people my ideas. :D.

rofl yeah!! but yeh rly props to whoever can do what andy suggested :ahh:

ttldomination 22-03-2009 15:16

Re: [FTC]: 121 Autonomous
 
Well, it's not that hard to implement. Let's say you're following a code, and something's not right. For example, if you're using a compass sensor, your sensor indicates you're not facing in the right direction or something, at that moment, your robot start counting encoder counts and angle measurements from the initial "alarm". After you no longer have movement or your encoders stop moving, then you simply perform the actions you did in reverse.


All times are GMT -5. The time now is 18:30.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi