Rubber traction/grippers
 

Does anyone know where you can buy the rubber traction that goes on the IFI traction wheels?

or do you just buy the wheel and strip off the rubbers..

THANKS!

(i hope this subject is in the right place...lemme know if it isnt and where i should put it next time)

Re: Rubber traction/grippers
 

Here's an entire page from McMaster that has all the specs and info you could want for the traction material:

http://www.mcmaster.com/#rough-top-belts/=19tn91

IFI Wheels come with both the Wedgetop or the rubber Roughtop. Some teams use the blue nitrile for wheel tread, but it's noticeably more expensive, so it may not be worth it for you.

Re: Rubber traction/grippers
 

http://www.ifirobotics.com/robot-traction-wheels.shtml

Thats the website, you can buy just the tread

Its known as incline conveyor belting and is available from several places, most commonly afaik mcmaster car
just search "incline conveyor belting"

http://www.mcmaster.com/#incline-conveyor-belts/=19to16

both wedgetop and roughtop are available, roughtop in different types of rubber

Re: Rubber traction/grippers
 

I believe the technical term is conveyor belting. Your choice of incline or food grade on McMaster. Choose your type (roughtop or wedgetop) and your material, but make sure it's strong enough.

http://www.mcmaster.com/#conveyor-belts/=19tob7 to start looking through some types. I believe IFI uses wedgetop.

Re: Rubber traction/grippers
 

ok thanks.

just what i was looking for

Re: Rubber traction/grippers
 

AndyMark also sells tread seperately for their wheels.