Chief Delphi - [FTC]: Allowable wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)

- - [FTC]: Allowable wiring (http://www.chiefdelphi.com/forums/showthread.php?t=76479)

team17

03-04-2009 17:29

[FTC]: Allowable wiring

Are we allowed to use longer wires than the ones that come in the kit so the motor controllers can reach each other?

dcribbs

03-04-2009 21:48

Re: [FTC]: Allowable wiring

The quick answer is no.

This is not the official FIRST Forum and to get a truly binding and correct answer you need to search the official Q&A first. If you can not find an answer to your question there then you should post you question and wait for an official answer.

http://forums.usfirst.org/forumdisplay.php?f=26

PhilBot

05-04-2009 08:35

Re: [FTC]: Allowable wiring

Quote:

Originally Posted by team17 (Post 845494)

Are we allowed to use longer wires than the ones that come in the kit so the motor controllers can reach each other?

Yes (see Q&A). The wire must be the same type and guage as the kit.
This is essentially #20 red and black wire.
You must use complete lengths (no soldering or splices)

All times are GMT -5. The time now is 18:35.