Chief Delphi - Team 279's 2009 Code [LabVIEW]

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Team 279's 2009 Code [LabVIEW] (http://www.chiefdelphi.com/forums/showthread.php?t=76676)

JasonF

14-04-2009 15:38

Re: Team 279's 2009 Code [LabVIEW]

Quote:

Originally Posted by Burmeister #279 (Post 850497)

did you use LabVIEW or C++?

LabView all the way.

I will learn C++ in the off season...

Burmeister #279

14-04-2009 16:06

Re: Team 279's 2009 Code [LabVIEW]

Sounds like a plan. I might end up with one less time waster this summer so i may not have to wait until next year to learn =)

JasonF

14-04-2009 20:08

Re: Team 279's 2009 Code [LabVIEW]

Here are a couple pieces I guess...

Here was the first version of the autonomous... I have created something different, but it was something to get us moving at our regional.

The comments are kind of lame, but they are just there to assist in teaching some other guys on my team about the code.

Autonomous Independent
http://i6.photobucket.com/albums/y23...dependentd.png
Periodic Tasks
http://i6.photobucket.com/albums/y23...odicTasksd.png

Burmeister #279

14-04-2009 22:58

Re: Team 279's 2009 Code [LabVIEW]

What is the I2C used in the periodic tasks?

JasonF

15-04-2009 01:30

Re: Team 279's 2009 Code [LabVIEW]

Devantech Digital Compass...

I believe to access multiple I2c modules i will need to open device 1, read dev1, close dev 1, open dev2, read dev 2, close rev2 and loop that sequence. Since the Devices used different addresses so they can use the same port.

We just didn't have enough time to code. Never enough time is there?

All times are GMT -5. The time now is 20:36.

Page 2 of 2

Show 100 post(s) from this thread on one page