communication to bridge problem solve!
 

There are many people in this forum wondering why there was no comm between the router and bridge after the competition "LUNACY".

We had the same problem and when we tried to connect to bridge via ethernets it wouldnt let you in the bridge page.

To solve this problem just get a new router and connect it to the bridge using ethernet cables. After that you should be able to go in the page and just do everything over(for the router and the bridge).

*Dont forget to have the same SSID for the router and the bridge!!!!!!*
Thats basically all we did, everything worked like it use to.

Re: communication to bridge problem solve!
 

You shouldn't have to get a new router. Just connect an ethernet patch cable directly from the computer to the wireless bridge. (Make sure the computer's IP address is set properly, of course.)

Re: communication to bridge problem solve!
 

Don't forget that security is still set from the competition. Return to the default as in your original setup.