Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Please welcome to the FIRST Family... (http://www.chiefdelphi.com/forums/showthread.php?t=78246)

Phoenix Spud 05-09-2009 19:34

Please welcome to the FIRST Family...
 
Hi Everyone,

I would like you all to know that the FIRST FRC team in Australia will be starting this up coming season. Special thanks to Team Phoenix (team 2342) for the loan of their overdrive robot. The Aussie team is being started at Macquarie University in the Sydney area. We already have generated quite a bit of interest! To find out more please look at our preliminary web page on the Macquarie University site. We look forward to seeing you at competitions this upcoming season!!!

BrendanB 05-09-2009 20:15

Re: Please welcome to the FIRST Family...
 
Soooo.... you finally let the cat out of the bag!:)


Just to let all of you know, if anyone should start a team in Australia, it should be Sarah (along with her family of course.;))

delsaner 05-09-2009 21:00

Re: Please welcome to the FIRST Family...
 
YAYY!!!

Our team talked about it a lot the beginning of last season. Everyone said they wanted to go last year, but decided not to go due to educational and budget reasons. Honestly, we probably wont manage to go to the Australia Regional anytime soon, but if we were closer to Australia then the east side of the US, we would probably go once or twice.

Congrats on getting a regional in Australia!
:D

Phoenix Spud 05-09-2009 21:27

Re: Please welcome to the FIRST Family...
 
Just to be clear, we are NOT starting an Aussie regional. Just one FRC team. Our plan is to compete at an existing regional in the USA.

BrendanB 05-09-2009 21:29

Re: Please welcome to the FIRST Family...
 
Quote:

Originally Posted by delsaner (Post 873051)
YAYY!!!

Our team talked about it a lot the beginning of last season. Everyone said they wanted to go last year, but decided not to go due to educational and budget reasons. Honestly, we probably wont manage to go to the Australia Regional anytime soon, but if we were closer to Australia then the east side of the US, we would probably go once or twice.

Congrats on getting a regional in Australia!
:D


Actually no, there is no Australian regional:( , only one team(currently unknown name and number) However, the hope is that they will be able to start several more teams in the Sydney area, but only one team for now. They believe that once they can get a good number of FIRST teams that they can get FIRST to start a regional. YEAH!!!:] And they have already started a good 5 FLL teams in there area.

delsaner 05-09-2009 21:30

Re: Please welcome to the FIRST Family...
 
Quote:

Originally Posted by Phoenix Spud (Post 873054)
Just to be clear, we are NOT starting an Aussie regional. Just one FRC team. Our plan is to compete at an existing regional in the USA.

Oh, my bad... Never-the-less, congratulations on bringing FIRST to Aussie... ;)

ebarker 05-09-2009 21:34

Re: Please welcome to the FIRST Family...
 
That's great !!!

Actually there may be not one but TWO teams starting in Australia. We have been working with a group for a few months in Melbourne. Their event would not be in Australia since there is no regional but in the states.

And if it all works out there may be another announcement.

.

Phoenix Spud 05-09-2009 21:36

Re: Please welcome to the FIRST Family...
 
We already have about 100 kids interested, we are going to hold our first informational meeting soon. Some of these kids are willing to take an hour and a half train ride just to build the robot! We are going to have 2342's robot at the upcoming Open Day at Macquarie University where we hope to get more kids interested. We are also going to hold our state's FLL championship tournament this November. We can't wait to get started!

Akash Rastogi 05-09-2009 21:36

Re: Please welcome to the FIRST Family...
 
That's quite impressive for Team Phoenix and this new rookie team. I wish you good luck. :)


Welcome to FIRST!

NorviewsVeteran 05-09-2009 22:36

Re: Please welcome to the FIRST Family...
 
*two thumbs up and a big grin*

Trent B 06-09-2009 00:18

Re: Please welcome to the FIRST Family...
 
Quote:

Originally Posted by Phoenix Spud (Post 873060)
Some of these kids are willing to take an hour and a half train ride just to build the robot!

That is dedication, and they haven't even experienced a build season to get them hooked :eek:

delsaner 06-09-2009 00:48

Re: Please welcome to the FIRST Family...
 
Quote:

Originally Posted by Phoenix Spud (Post 873060)
We already have about 100 kids interested, we are going to hold our first informational meeting soon. Some of these kids are willing to take an hour and a half train ride just to build the robot!

With kids who are that willing and dedicated, you could get a FRC regional in Australia in no time!

^__^

Good for them!

Nick Lawrence 06-09-2009 03:48

Re: Please welcome to the FIRST Family...
 
I'm green with envy. You get to go surfing on First and Second Christmas!

-Nick

OZ_341 06-09-2009 08:31

Re: Please welcome to the FIRST Family...
 
Quote:

Originally Posted by Phoenix Spud (Post 873046)
Hi Everyone,

I would like you all to know that the FIRST FRC team in Australia will be starting this up coming season. Special thanks to Team Phoenix (team 2342) for the loan of their overdrive robot. The Aussie team is being started at Macquarie University in the Sydney area. We already have generated quite a bit of interest! To find out more please look at our preliminary web page on the Macquarie University site. We look forward to seeing you at competitions this upcoming season!!!

It was nice working with you last spring and I'm glad to see your robot made it through the shipping gauntlet. If you need any other help, please feel free to contact me by PM, email, or through our team website.
Best Wishes for a great 2010 season!

Al Skierkiewicz 06-09-2009 11:38

Re: Please welcome to the FIRST Family...
 
Welcome aboard to any one from Down Under! If you need help this is a good place to ask for it. Many of us check daily and sometime more often so if you are in need of a an answer just ask. Please remember, we are 12 hours difference in some cases so we may be sleeping when you ask your question.


All times are GMT -5. The time now is 21:25.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi