Autodesk - .stp file to .iam
 

So I wanted an autodesk assembly file of the AM shifter, and I found this thread:

http://www.chiefdelphi.com/forums/sh...ter+autode sk

I would have posted there, but it's closed.

So, here's the problem. I followed the instructions, and I opened the .stp file, and it worked. As the old post said, nothing was constrained, but I grounded everything and saved it as a .iam file. This all worked fine, but when I placed the AM Shifter assembly into another assembly, after i constrained it down, Autodesk froze. I did this two more times and the same thing happened. I've had autodesk 2009 freeze a couple of times over the year that I've had it, but never 3 times in a row, so I guessing it has something to do with the converted .stp file. Anyone have this problem? Any ideas?

Thanks,

-Seth

Re: Autodesk - .stp file to .iam
 

Wow, thats very odd indeed...

When you say you did this 2 more times... does that mean placing it into an assembly? or does that mean re-downloading that from AM and converting it from a STEP file?

I'd try that last one... and if that doesn't work try rebooting your pc. Sometimes that will fix the issue between autodesk and windows.

Re: Autodesk - .stp file to .iam
 

Rebooted, re-downloaded the files and it happened two more times.

This is very annoying...

Re: Autodesk - .stp file to .iam
 

Wow that really stinks dude...

Try this CAD Site. my bud RC put this together with help of a ton of other people. This has the files for inventor.. constrained and everything. It has everything you'd need I'm sure.

http://team1323.com/cad/index.html

Re: Autodesk - .stp file to .iam
 

Thanks alot, I should get around to uploading some files there.