NI LabView on Windows 7
 

Lenovo z61e
Windows 7 Enterprise - 32 bit
Intel Core Solo Processor T1300 @ 1.67Ghz
3.0 GB PC2-5300 RAM

The initial installation dialog from the root of the 2009 FRC Dialog will not work on Windows 7.

If you "Explore" the disc and navigate to the LabView Folder you CAN install the 2009 FRC LabView software as individual items. I am also currently working on installing and testing LabView on a Lenovo S12 Netbook with the following specs:

Lenovo S12
Windows 7 Enterprise - 32 bit
Intel Atom n270 Processor
2.0 GB PC2-5300 RAM

The netbook is definately a cheaper option, and with the 12" screen we simply purchased a 19" LCD monitor to accompany each.

This is not a recommendation as to whether or not to use Windows 7 as your Operating System.

Side Note...
I have noticed increased performace in LabView running on Windows 7

Re: NI LabView on Windows 7
 

I hope new LabVIEW is going to work(and INSTALL) on Windows 7 64-bit system without any problem :(

NI declared that LabVIEW will NOT support Windows 7 officially for FRC version since they have not completed their compatibility test.

Re: NI LabView on Windows 7
 

I don't yet have any experience with Windows 7 64-bit. I do know that there have been some compatibility issues with 64-bit and other applications.

Re: NI LabView on Windows 7
 

As a side note, but related, Inventor and Solidworks (both student edition, both '09) installed for me without a problem in Windows 7.

Re: NI LabView on Windows 7
 

Unofficially, I do have SolidWorks 2009 - 32 bit running on my laptop with Windows 7 installed.

Please note that the NI software application NI SoftMotion that allows you to communicate between LabView and SolidWorks Motion has not been tested on Windows 7 and requires SolidWorks 2009 SP4 or greater. We will work on this for next year. http://zone.ni.com/devzone/cda/tut/p/id/10099

Marie

Re: NI LabView on Windows 7
 

LabVIEW 2009 for Tech installed on Windows 7 Ultimate and works fine.

Re: NI LabView on Windows 7
 

If the labview version that the beta testers have received is any indication, you will NOT be receiving labview 2009 at the start of the season: we are all using 8.6.<insert latest beta update here> - but who knows what FIRST has up their sleeves.

That said, we have several beta testers running labview on windows 7. The installer didn't work (they had to install each component individually) but once they had it up and running, it wasn't an issue.

That said, I've been on the more conservative side when it comes to computer programs. Bleeding edge usually means problems, and we already have enough of those with our robot without worrying about finding new problems on unsupported software interactions :D

Re: NI LabView on Windows 7
 

Ok i got a question i have 2009 LabVIEW where the nut would i find the FRC Toolkits and addons?

Re: NI LabView on Windows 7
 

To my knowledge you cannot get an FRC Toolkit or addons for LabView 2009

Re: NI LabView on Windows 7
 

If onlt the world made sense, cause i know FTC all you have to do is get a add on why couldn't they do the same for FRC.

Re: NI LabView on Windows 7
 

NI declared that LabVIEW will NOT support Windows 7 officially for FRC version since they have not completed their compatibility test.

Re: NI LabView on Windows 7
 

The testing that was done with Win7 succeeded, but since LV 8.6 shipped long before Win7, it wasn't complete. Some of the beta members used Win7 and there were no issues that I remember. What NI is saying is the same thing they say anytime a product has incomplete testing.

Greg McKaskle

Re: NI LabView on Windows 7
 

Hi, I was searching for help on how to install the 2010 Labview (last year's)on windows 7, we got the "starter edition" on our netbook, a
Gateway LT2030u with the following:
Intel Atom processor N270
10.1 LED LCD
HDD 250 GB HDD
1 GB Ram
Windows 7 Starter.

I just need clarification on what you mean by install each items individually...Thank you.