Chief Delphi - Question about bumpers

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Question about bumpers (http://www.chiefdelphi.com/forums/showthread.php?t=79718)

SWAT1806

09-01-2010 13:44

Question about bumpers

Has anyone found if the manual gives the exact height the bumpers need to be from the ground?

BJT	09-01-2010 13:49

Re: Question about bumpers

The bumper zone is between 10 and 16 inches from the floor. I learned this by reading the manual.

SWAT1806

09-01-2010 13:52

Re: Question about bumpers

I have been in the manual can you direct to which section you have found this information in.

engunneer

09-01-2010 13:57

Re: Question about bumpers

Manual chapter 8, Section 8.2 (Definitions) on page 3 (of 32)

in general, anything in ALL CAPS will be in the definitions section of each Chapter

BJT	09-01-2010 13:57

Re: Question about bumpers

It's in the definition of BUMPER ZONE in the ROBOT section.

All times are GMT -5. The time now is 08:02.