Chief Delphi - <R07> F -source for bumper fabric?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - <R07> F -source for bumper fabric? (http://www.chiefdelphi.com/forums/showthread.php?t=79774)

Andy Brockway

09-01-2010 21:52

<R07> F -source for bumper fabric?

Anyone know what color code and where you can buy fabric that meets the rule for "corresponding color in the FIRST logo"?

hyperdude

09-01-2010 23:45

Re: <R07> F -source for bumper fabric?

Is your goal to exactly match the colors on the FIRST logo? I think that would be going a bit too far in pursuit of following the rules.

<R07> states the red and blue colors must be as close to solid red and blue as reasonable

Quote:

(i.e. to a reasonably astute observer, they appear similar)

I think the whole "corresponding color" bit was to make it so teams don't use like navy blue and dark pink for their colors. Purple, in my mind, would be out of the question. :P

Anyway, I'll leave it up to a future poster to communicate the color codes and where to get fabric. <R07> part E says it should be "1000 dernier Cordura Plus®" fabric. I'll ask my coach where we ordered our fabric in the past years.

Ted Weisse

10-01-2010 00:11

Re: <R07> F -source for bumper fabric?

We have ordered bumper fabric from Seattle Fabrics since 2006:
http://www.seattlefabrics.com/nylons.html#fc1

Colors we believe are the closest colors to FIRST are:

#1500 – Red

#4345 – Mariner Blue

http://www.seattlefabrics.com/nylons.html#fc1

Alex Dinsmoor

10-01-2010 00:38

Re: <R07> F -source for bumper fabric?

Based on the logo guidelines, they specifiy the exact color schemes for the logo.

They are on page 18.

artdutra04

10-01-2010 04:37

Re: <R07> F -source for bumper fabric?

Quote:

Originally Posted by R07

...
E. The BUMPERS must be covered with a rugged, smooth cloth (1000 dernier Cordura Plus® strongly recommended). The cloth must completely enclose the BUMPER backing (plywood) and cushion (pool noodle) material. It is recommended that lengths of aluminum angle be used to clamp the fabric in place.
...

Cordura is strongly recommended, but denim works just as well at a fraction of the price.

We used denim last year, and the only time we had a problem was off the field when the students tried to push the robot (27" wide) with bumpers (an additional 6.5" width) through a 30" doorway. :rolleyes:

GaryVoshol

10-01-2010 07:13

Re: <R07> F -source for bumper fabric?

We've used AH&H before: http://www.ahh.biz/

ajlapp

10-01-2010 07:43

Re: <R07> F -source for bumper fabric?

Red and Blue Bumpers.

These bumpers from Andymark look like the proper color. I don't see an area where you can buy just the fabric.

millerm277

10-01-2010 10:36

Re: <R07> F -source for bumper fabric?

Quote:

Originally Posted by GaryVoshol (Post 895515)

We've used AH&H before: http://www.ahh.biz/

We also use them as well, never had any problems with them.

nitsua60

11-01-2010 22:16

Re: <R07> F -source for bumper fabric?

Those of you who have used AH&H, do you recall or can you look up what specific colors (by their names) you have used? On-screen I'd say "mariner blue" and "barn red" look closest, but I'd love to hear from someone who's seen the actual fabric. Thanks.

GaryVoshol

12-01-2010 07:36

Re: <R07> F -source for bumper fabric?

We used yellow and black in the past, so have no experience with red or blue.

All times are GMT -5. The time now is 06:10.