Driver station missing VIs
 

Our driver station automatically comes up in the Driver acount.
And the Driver Station software is missing two sub-VIs: Read from FRC IO.vi and Write to FRC IO.vi.

How can I stop the automatic log in to the Driver account?
Where are two missing VIs?

Re: Driver station missing VIs
 

The automatic login is bypassed by holding shift while booting. It seems more likely that those VIs are broken by the missing nicyapi.dll. This may have to do with the order of updates. We have a few reports of this and we are looking into it. Someone else on the forums may already have a solution. My advice if you can't find anything else would be to use Add/Remove Programs to uninstall the Driver Station from the National Instruments section, and then reinstall.

Greg McKaskle

Re: Driver station missing VIs
 

I found that when you are in the DS mode, if you hold CTL,ALT,DEL, you will exit to Windows.

Re: Driver station missing VIs
 

Note that feature changed a bit between when the laptop image was prepared and the current update. The laptop version expected teams to use Ctl-Alt-Del. The updated version has an exit button on the setup tab.

Greg McKaskle

Re: Driver station missing VIs
 

Greg,
You are right.
The nicyapi.dll is the missing dll.
Thanks

Re: Driver station missing VIs
 

Here's NI's answer to this missing file:

http://decibel.ni.com/content/docs/DOC-8891

Re: Driver station missing VIs
 

We downloaded the .dll and that fixed our problem.
Thanks to everyone.