Chief Delphi - pic: R07-Bumper configuration legality

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: R07-Bumper configuration legality (http://www.chiefdelphi.com/forums/showthread.php?t=79903)

Trevor_Decker

11-01-2010 01:01

pic: R07-Bumper configuration legality

loading photo ...

infinitydex

11-01-2010 01:03

Re: pic: R07-Bumper configuration legality

no it has to cover 100% of ur robot
ball has to go under ur bumper:yikes: :yikes: :yikes: :yikes: :yikes:

Boydean

11-01-2010 01:03

Re: pic: R07-Bumper configuration legality

As noted in <R08-A>

Quote:

Originally Posted by <R08-A>

BUMPERS must provide complete protection of the entire FRAME PERIMETER of the ROBOT (i.e. BUMPERS must wrap entirely around the ROBOT). The BUMPERS must be located entirely within the BUMPER ZONE when the ROBOT is standing normally on a flat floor, and must remain there (i.e. the BUMPERS must not be articulated or designed to move outside of the BUMPER ZONE).

It will not be legal.

T3_1565

11-01-2010 10:45

Re: pic: R07-Bumper configuration legality

You don't need that space. The ball rolls under the bumper zone as it is (having a rough diameter of 8 inches) So you have nothing to put a space there for.

Also no, that set up is not legal. must cover 100% of the bot.

Wayne Doenges

11-01-2010 12:19

Re: pic: R07-Bumper configuration legality

100% means bumpers go all the way around the robot. No gray area here.

Taylor

11-01-2010 12:20

Re: pic: R07-Bumper configuration legality

Quote:

Originally Posted by Wayne Doenges (Post 896546)

No gray area here.

And hooray for that.

All times are GMT -5. The time now is 07:39.