Re: 2010 Camera and vision problems.
 

If the C++ code does work, is there any way you can put together a list of what we might be doing wrong? I'm getting nowhere fast as of now.

Re: 2010 Camera and vision problems.
 

With Java, it pretty much went.
Download: http://joule.ni.com/nidu/cds/view/p/lang/en/id/1534 and install it
Update cRio Image to v19 (Tick Format Controller)
Plug Camera into Laptop and Run Config Utility
Plug the camera into the robot using Port 2 and a Crossover Cable
Pull down the Netbeans plug-ins
Run the source code I posted on the last page

I'd assume it would be the same for Wind River, except you would need to download the update from http://first.wpi.edu/Images/CMS/Firs...te20100107.exe for Workbench.

Re: 2010 Camera and vision problems.
 

Hmm, only difference between your list and mine is that I manually edited the username and password rather than use the Config Utility. Does the Config Utility change anything else on the camera? I'll give running that a shot once I get into the lab and post results.

Re: 2010 Camera and vision problems.
 

Something else you may want to try, if you used Wind River last year is to uninstall it and delete all traces of it. Then reinstall, I think the location of WPILib.a moved down a directory and Wind River could be pointing to the wrong file.

You may also try searching for WPILib.a under C:\Windriver and deleting it, after that reinstall the Workbench update. If it can't find WPILib.a then that's your issue and you need to point to the current location. If you were using WPILIb source code to compile you WPILib.a file that can cause the issue as well. I haven't seen the new version of WPILib source yet.

Re: 2010 Camera and vision problems.
 

Yep, I have gotten past that point in the code. Duno if tracking works though because the lens was out of focus and is now dead, so I'm heading over to Fry's to get another one.

The dashboard on the Driver Station doesn't work though. :(

Re: 2010 Camera and vision problems.
 

Still absolutely no dashboard data with the 2010ImageDemo. I'm getting the code to run, however there's an output line on the VxWorks console that worries me.


No idea what it means, but it doesn't look promising to me. Any help?

Re: 2010 Camera and vision problems.
 

That means something deleted the camera Task. Usually by going out of scope. Make sure you don't accidentally dispose the camera

Re: 2010 Camera and vision problems.
 

I'm working on LabVIEW trying to solve the same problem. I've gotten the image to show up on the LabVIEW instrument, but not on the dashboard. I am getting the image from the cRio.

Re: 2010 Camera and vision problems.
 

Hey does anyone know were the demo code is located I can't find it anywhere.
Thanks,

Re: 2010 Camera and vision problems.
 

Some people seem to be having a similar problem to what I had ...
in my case the DSupdate did not update the dashboard (only the driver station). I only noticed because I installed the update on a second laptop and it looked different. I went back and checked the file date and it was not the same on the classmate. I had to run the DSupdate program, but tell it to uninstall, then run it again and install. Now it works.

- Kevin

Re: 2010 Camera and vision problems.
 

You should be able to create demo code by selecting File -> New -> Example

Make sure you follow the "Getting started with C++" document the first time.

- Kevin

Re: 2010 Camera and vision problems.
 

Reinstalling worked for us!!!!
Thanks guys,
Julian

Re: 2010 Camera and vision problems.
 

Did you reinstall Windriver? or the driver station update?

Re: 2010 Camera and vision problems.
 

I finally got camera output + target data on the dashboard. The problem was indeed the drivers station update.

Here's how to fix it:

1. Download the drivers station update: http://joule.ni.com/nidu/cds/view/p/lang/en/id/1535
2. Run the drivers station update and install.
3. Run the drivers station update and select remove for both components.
4. Run the drivers station update and install.

This fixes it. NI needs to fix the installer.

Re: 2010 Camera and vision problems.
 

I was just about to post this. Exactly what I had to do to fix the problem.

I also have the camera tracking the target on a pan/tilt assembly :yikes: .