Chief Delphi - 2010 Denso WIN motor specs

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - 2010 Denso WIN motor specs (http://www.chiefdelphi.com/forums/showthread.php?t=80050)

Jonnadiah

12-01-2010 18:18

2010 Denso WIN motor specs

Hey,

Does anyone have the full specs for this year's Denso WIN motors? We're having a heck of a time finding them.

Thanks in advance.

bmusser

12-01-2010 23:25

Re: 2010 Denso WIN motor specs

1 Attachment(s)

I have these specs from 2007.

DaLolzReaper

20-01-2010 15:19

Re: 2010 Denso WIN motor specs

Hi team 612 is looking for connectors from the Denso motors. We need connectors so that we can attach gears to the motors.

Dad1279

20-01-2010 15:43

Re: 2010 Denso WIN motor specs

Quote:

Originally Posted by DaLolzReaper (Post 903187)

Hi team 612 is looking for connectors from the Denso motors. We need connectors so that we can attach gears to the motors.

4 couplers came in the kit this year.

Teched3

20-01-2010 16:31

Re: 2010 Denso WIN motor specs

Here is a link to a spreadsheet for all the FIRST motors in the kit. CIMs are listed first, but you can pull down a menu to select a different motor in B13, and a new curve will appear.

http://www.chiefdelphi.com/media/papers/2320?:)

Hope this helps.

DaLolzReaper

21-01-2010 07:33

Re: 2010 Denso WIN motor specs

Thank you,
We have found the connectors. :)

trilogy2826

28-01-2010 09:59

Re: 2010 Denso WIN motor specs

Quote:

Originally Posted by DaLolzReaper (Post 903747)

Thank you,
We have found the connectors. :)

Can you help the rest of us out and tell us where you procured the connectors?:confused:

matt 1923

31-01-2010 19:29

Re: 2010 Denso WIN motor specs

please?

chris janney

01-02-2010 07:42

Re: 2010 Denso WIN motor specs

hey is anyone else using the denso motors to lift their robot? if so, what gears are you using and where can I get some at?

JamesCH95

07-02-2010 14:25

Re: 2010 Denso WIN motor specs

You might want to think about using a CIM motor to lift, the denso motors are good for 13watts or so while the CIM motor is good for almost 200watts.

kevinb999

16-02-2010 23:03

Re: 2010 Denso WIN motor specs

Where in the KoP are the connectors? I cannot find them in the check list!

Lafleur

01-02-2011 19:53

2011 Denso WIN motor specs

any one know where to find the connectors for the denso motors?? or the part number?

tom@lafleur.us

Quote:

Originally Posted by trilogy2826 (Post 908439)

Can you help the rest of us out and tell us where you procured the connectors?:confused:

sanddrag

01-02-2011 20:04

Re: 2010 Denso WIN motor specs

I found it elsewhere on this forum. I haven't ordered these myself, so I'm not sure if it is correct. Here is what someone else referenced:

Connector housing - Mouser p/n 829-12129487 - Delphi p/n 12129487
Connector seal - Mouser p/n 829-15300020 - Delphi p/n 15300020
Terminal (14ga) - Mouser p/n 829-12110845 - Delphi p/n 12110845-L

There are several different terminals available, for different wire gauges:
http://connectors.delphi.com/DCSGDMC...=Y&vE xact=0&

All times are GMT -5. The time now is 05:57.