Mechanism to Possess Soccer Balls
 

Does anyone have a good idea or tips for an effective way to pull in a soccer ball, maintain possession of it by continually holding it, while still being able to drive forwards, reverse, and turn? So far the only idea that comes to mind is a vacuum. Your thoughts? Thanks. :)

Re: Mechanism to Possess Soccer Balls
 

Might want to check out the Ball Magnet thread...

Re: Mechanism to Possess Soccer Balls
 

Oh, thanks. I guess my thread was a waste then

Re: Mechanism to Possess Soccer Balls
 

As long as you got the help you were looking for, then it was not a waste at all. :)

Re: Mechanism to Possess Soccer Balls
 

I watched the ball magnet video and it seems like there's a cylindrical wheel thats spinning in the direction of the robot to pull in the ball and the wood is only there so it does not go into the robot, like the balls would have for last years game. But i think there's a way i could implement this somehow and possibly also use a vacuum to help maintain possession. So this was a big help :D

Re: Mechanism to Possess Soccer Balls
 

Try it with the roller and you might decide you don't need vacuum. But you'll have to try it to know, won't you?

Re: Mechanism to Possess Soccer Balls
 

good point, i'll try to put something together tomorrow to test it out.

Re: Mechanism to Possess Soccer Balls
 

The limiting factor with our robots is the three inch rule. In our test the ball stayed with the robot going left and going right and even backwards but when the robot moved forward and suddenly stopped the ball popped right out.

Unless we can overcome this limitation the magnet may not work as well as we hope. The next step for us will be trying different sticky materials to coat the roller with . Any good suggestions?

Re: Mechanism to Possess Soccer Balls
 

Yeah, I was planning on trying out a vacuum suction deal, but after seeing the power of the roller, I think that is all we will need. Looks like tomorrow I'll be trying out the roller on last year's bot wit the soccer balls. Too bad we just pulled the cRio out!

Re: Mechanism to Possess Soccer Balls
 

maybe have something thats gonna have a lot of friction with the ball like sandpaper so that even if you stop it won't move away from the bot, cause the material will be too rough.

Re: Mechanism to Possess Soccer Balls
 

It will be interesting to see how changing the height of the roller and ingress of the ball affects it. I can see how it could be a problem if we have the ball not in so far, so we'll work on prototyping a more legal version real soon.

Thanks for the input Sam.

btw the roller in ours is ABS pipe covered with spray rubber, which is a product designed for coating tool handles and such.

Re: Mechanism to Possess Soccer Balls
 

How about the Sticky Pad? It is a tacky material to help hold cell phones, PDAs, etc. on a dash.

Another idea is the tacky shelf liner. It come in large rolls, so you should be able to attach it to a roller.

Good luck. I look forward to seeing your results.

Re: Mechanism to Possess Soccer Balls
 

I was thinking of using spray rubber.

We have lots of experience with drawer liner, but it just falls apart to easily. Not a big problem last year but not real good for the soccer balls. The other thing to worry about is the inflated state and the surface texture of the ball can cause problems.

I'm thinking about a spring loaded roller or something.

Re: Mechanism to Possess Soccer Balls
 

We used the same coating on our grippers to handle game pieces in 2007. Tackiness rules!

Re: Mechanism to Possess Soccer Balls
 

Imagine a large pair of pliers. Take the handles, coated with friction tape or gripper tape, and point them away from you. With the handles opened as wide as they go, the mechanism could satisfy the perimeter rules. Considering the 3 inch penetration rule, when you get to a soccer ball and close the plier-inspired device, the "handles" may in fact extend up to the bumper perimeter, but two seconds may be enough time to grab the ball, reposition, and pass it up field.

Thoughts?