Chief Delphi - 4" tractions wheels

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - 4" tractions wheels (http://www.chiefdelphi.com/forums/showthread.php?t=80214)

caincteam2777

14-01-2010 23:02

4" tractions wheels

does anyone know how to assemble 4" traction wheels. i need to put two on a axle and have two axles. does anyone know how to do this?

Trent B

14-01-2010 23:09

Re: 4" tractions wheels

Andy Mark, IFI, someone else?

Specifying the wheel type always helps. :)

AndyMark Appears to be assembled (maybe not treads)

For IFI
http://content.vexrobotics.com/docs/ifi-wheel-4.pdf

caincteam2777

14-01-2010 23:21

Re: 4" tractions wheels

http://andymark.biz/am-0014.html how do you get them on a shaft more or less, and how do you mount them

EricH

15-01-2010 00:47

Re: 4" tractions wheels

Quote:

Originally Posted by caincteam2777 (Post 899460)

http://andymark.biz/am-0014.html how do you get them on a shaft more or less, and how do you mount them

Live axle or dead axle?

It looks designed for a dead-axle drive, so we'll go with that. You'd put the sprocket onto the hub, and then you'll need a pair of appropriately sized bearings inserted into the center. Put an axle through the bearings and add to the robot.

caincteam2777

15-01-2010 23:14

Re: 4" tractions wheels

it says that bearing come with it, but we will see.

All times are GMT -5. The time now is 16:04.