Chief Delphi - cRIO imaging

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - cRIO imaging (http://www.chiefdelphi.com/forums/showthread.php?t=80264)

alex42

15-01-2010 19:26

cRIO imaging

The cRIO imaging tool can't find the cRIO. The driver account on the DS can tell whether or not the cRIO is there, but when I try to run the cRIO imaging tool on the developer account, it never finds the cRIO.

bladetech932

16-01-2010 00:24

Re: cRIO imaging

Are you using the crossover cable to connect from the classmate to the C-RIO?

alex42

16-01-2010 14:55

Re: cRIO imaging

Yes. Initially we weren't, but then we realized our mistake. There was no apparent effect from switching to the correct cable though.

alex42

16-01-2010 20:05

Re: cRIO imaging

Turns out the problem was that the cRIO was in safe mode. We didn't realize it because the switch looked like it was off. Also that the wifi connection was turned on.

All times are GMT -5. The time now is 23:27.