Chief Delphi - cRIO HELP!!!

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - cRIO HELP!!! (http://www.chiefdelphi.com/forums/showthread.php?t=80353)

mcristina444

16-01-2010 15:16

cRIO HELP!!!

My team is not a rookie team so we have the cRIO from lat year. we decided not to use the classmate from devolpment. So we installed labview to a separate computer.we try to connect to the cRIO through the imaging tool but it can never find it. we have tried both crossover cables and straight cables but each time it can not find it. Any one elese have this problem?

Greg McKaskle

16-01-2010 17:33

Re: cRIO HELP!!!

Be sure to turn off firewalls and disable any other networking interfaces such as wifi.

Greg McKaskle

alex42

16-01-2010 17:41

Re: cRIO HELP!!!

We're having the same problem. If I find a solution, I'll tell you.

alex42

16-01-2010 20:02

Re: cRIO HELP!!!

Also make sure that the cRIO isn't in safe mode. In that case, the DS won't be able to find it.

DanDon

16-01-2010 20:09

Re: cRIO HELP!!!

Just a thought....make sure your computer's IP address is set up to

Code:

10.XX.YY.ZZ

where XX and YY are a four digit team number (with a leading zero if necessary) and ZZ is any unused address on the network.

jhersh

17-01-2010 04:51

Re: cRIO HELP!!!

Also make sure you don't have any other network interfaces such as wireless adapters enabled.

aeasson

17-01-2010 14:28

Re: cRIO HELP!!!

Be sure to check firewall status.
I had the probem you are describing and had to turn off the windows firewall.

All times are GMT -5. The time now is 15:28.