Chief Delphi - Fisher Price gears

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Fisher Price gears (http://www.chiefdelphi.com/forums/showthread.php?t=80388)

MrForbes

16-01-2010 21:52

Fisher Price gears

We looked at the Fisher Price motors and transmissions that were in the 2010 KOP today. The motors have 15 tooth gears, the documentation says they have 16 tooth gears, and the transmissions seem to be designed to work with 19 tooth gears (the motor gear does not mesh with the transmission gear).

Has anyone else looked at theirs or noticed any problems?

trilogy2826

16-01-2010 23:28

Re: Fisher Price gears

Check out Team update #2:

http://www.usfirst.org/uploadedFiles...Update%202.pdf

Page 5 - Section 10 KOP: States it is a 19 tooth.

I will check ours tomorrow to confirm if we have 19 tooth. Could get interesting if we got the wrong gears now that our KOP check deadline has expired.

RogerR

16-01-2010 23:31

Re: Fisher Price gears

Quote:

Originally Posted by squirrel (Post 900745)

We noticed this as well. I just recently talked to Steve of 2815, and it appears theirs are 15 tooth too.

Dad1279

17-01-2010 11:53

Re: Fisher Price gears

Ours are 15 also

Trent B

17-01-2010 16:36

Re: Fisher Price gears

I was pretty sure we tested ours this year and they meshed fine but I am not sure, I will count the teeth tomorrow and report back here.

Bruceb

17-01-2010 16:48

Re: Fisher Price gears

Ours are 15 tooth also. Haven't checked the mesh.
Bruce

All times are GMT -5. The time now is 14:48.