Jaguars arent working
 

Hey
i have tried to connect a motor today and all i have got is an orange blinking light (On my jaguar... any jaguar) istead of a green light...

i need some help !

thenks...

Re: Jaguars arent working
 

The jaguar needs to have a pwm cable connected to a Digital Sidecar PWM that has been Opened in code actively running on the cRIO and it has to be Enabled by the Driver Station which must have the E-stop button plugged in.

Did you power everything up and connect it all?
What are the Driver Station status lights showing.

Re: Jaguars arent working
 

Yoav,

Is the PWM cable attached between the Jaguar and the Digital Side Car?

Re: Jaguars arent working
 

Jinx!

Re: Jaguars arent working
 

Everything is connected as showed in the Diagram posted in firstw's site...
should i put a "jumper" as i did when i connected the camera servos?

Re: Jaguars arent working
 

No jumper.
Jumpers are only needed to run servos.

What is the status light on your Digital Sidecar doing (solid, long on-quick off, fast bink)?
I circled it in red in this photo from AndyMark.biz.

Re: Jaguars arent working
 

Never mind, we fixed it- there was a problem with the programming..:mad:

but thank you all for the quick comments !!