Chief Delphi - No camera images on Driver Station

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - No camera images on Driver Station (http://www.chiefdelphi.com/forums/showthread.php?t=80580)

EncodersRUS

29-01-2010 21:31

Re: No camera images on Driver Station

Happily enough, everything seems to be working at full capacity now!
Thank you everyone!

Team_136

02-02-2010 15:14

Re: No camera images on Driver Station

We're having an issue were the green light on the cRIO port 2 does not turn on when we connect the camera to it. How can we get the port 2 to work?

Alan Anderson

02-02-2010 15:46

Re: No camera images on Driver Station

Quote:

Originally Posted by Team_136 (Post 911887)

We're having an issue were the green light on the cRIO port 2 does not turn on when we connect the camera to it. How can we get the port 2 to work?

Neither the cRIO nor the camera have "autosensing" Ethernet ports. You must use a crossover cable to connect them. (The one in the Kit of Parts was listed as orange, but I think ours was pink.)

All times are GMT -5. The time now is 05:54.

Page 2 of 2

Show 100 post(s) from this thread on one page