Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pro ENGINEER / Creo (http://www.chiefdelphi.com/forums/forumdisplay.php?f=169)
-   -   PTC KOP Start Parts for Pro/ENGINEER (http://www.chiefdelphi.com/forums/showthread.php?t=80770)

skotmorris 21-01-2010 13:37

PTC KOP Start Parts for Pro/ENGINEER
 
1 Attachment(s)
I should have released these sooner, but attached are the Start Models PTC used to create many of the new models in the KOP. These models have layers with rules in them just like the KOP models. They also contain the default mass properties calculation in the footer.

If you are not familiar with the use of Start Parts in Pro/ENGINEER, please take a look at the help system and search for "start_model_dir", "template_solidpart" and "template_designasm". These config.pro options define how and where start parts are located and used to create new models.

If you don't want to get that detailed, just put these files in your working directory and whenever you create a new part or assembly, uncheck "Use Default Template" and you will be prompted to choose another template model.


All times are GMT -5. The time now is 06:25.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi