Robot code isn't loading onto driver station
 

Hello. We are having trouble getting our robot to work. We have successfully built and deployed a basic project (changing from arcade to 4-motor tank drive), yet our driver station can't read any code on the robot. It was working fine until we attempted to install an update. We believe that we improperly installed it before, but now we have fixed it. Please help.

Re: Robot code isn't loading onto driver station
 

You think you're deploying code successfully, but the Driver Station disagrees? One thing that can cause that symptom is not having the proper image in the cRIO. Have you re-imaged it with the v19 file?

Re: Robot code isn't loading onto driver station
 

Thanks for your help we figured it out by ourselves and it was the C-rio not being reimaged properly.