Chief Delphi - Cypress PSoc Programmer Port Selection problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - Cypress PSoc Programmer Port Selection problem (http://www.chiefdelphi.com/forums/showthread.php?t=80974)

Steven_585

23-01-2010 17:13

Cypress PSoc Programmer Port Selection problem

In the PSoC Programmer, under Port Selection the board is not displayed when connected. The Device Family (CY8C38xx) is not listed, nor the Device (CY8C3865AXI-056 I believe).

Am I missing an update for the PSoC Programmer or Creator?
If so, which ones and where can I find them.

Thanks!

Jim.D

23-01-2010 20:48

Re: Cypress PSoc Programmer Port Selection problem

I have ver. 3.10.1.616 . The board is listed as Firsttouch3 in the port selection window.

Mark McLeod

23-01-2010 23:06

Re: Cypress PSoc Programmer Port Selection problem

There was a problem some teams encountered that required uninstalling/reinstalling the PSoC s/w (included with the Driver Station Update or via CD in the PSoC case).

http://www.chiefdelphi.com/forums/sh...d.php?p=899006

All times are GMT -5. The time now is 23:30.