pic: 2791 Teaser 1
 

Re: pic: 2791 Teaser 1
 

im guessing its going to be used to pull your robot up the tower by folding it

Re: pic: 2791 Teaser 1
 

On the right track...

Note: as pictured it's not robot ready, it's missing various pulleys and spacers and whatnot.

Re: pic: 2791 Teaser 1
 

awww...that was going to be my guess

Re: pic: 2791 Teaser 1
 

or it could be used to right the robot if it turns over? I'm pretty sure it's to lift it though.

Re: pic: 2791 Teaser 1
 

I think it is one of 8 legs for the robot. During normal configuration, it shuffle walks carefully with each leg bent up inside the BUMPER PERIMETER. During finale, it stretches the legs and gallops up the bump onto the tower. As an added bonus, the bot can now shoot in 8 directions.

Re: pic: 2791 Teaser 1
 

I think it is a workbench or table, used to intervene between an object and the gravitational pull of the earth below it. This one seems to be decorated with some sort of robot device and a collection of sockets.

Re: pic: 2791 Teaser 1
 

This is a three stage extending arm, right Chris? You're going to use it to lift some sort of hook up to the tower, then winch the rope in to lift the robot. The arm doesn't have to provide the lifting force, so it doesn't have to be very strong.

Did I get it?

Re: pic: 2791 Teaser 1
 

Yup. :D

A prototype is being built to actuate it from folded into the bumper area to fully extended with one pneumatic cylinder. Hook velcroed to the top for secure hold yet easy removal.

Find me at Champs (if you go) for your cookie.

Re: pic: 2791 Teaser 1
 

Nice! This was an idea my team discussed a lot. One piston is going to actuate that whole thing? How does that work? I like how it's a really simple system, though.

Thanks! I'll try! :D

Re: pic: 2791 Teaser 1
 

Yay for winches, I believe we're doing something similar on our bot this year.

At this rate, you're going to owe a lot of people cookies.

Re: pic: 2791 Teaser 1
 

One of the adult mentors had this thing that when he explained it to me, made perfect sense, that I can't very well repeat right now. It's easier to do talking with hands... I guess you'll have to wait until we get it working :) Something about the placement of the pivot point pulling the string and something like that.

I plan on bringing a whole box of cookies (leaving it just outside the pits of course) and making runs to it throughout the event.

Re: pic: 2791 Teaser 1
 

I would bet that the final design looks something like this (on a smaller scale of course):



LINK (if embedding doesn't work)

Re: pic: 2791 Teaser 1
 

Pretty much exactly that. When all's said and done it may only have 2 or 2.5 stages. Very light and simple is what was desired, and a folding option to keep the tunnel as a possibility and to lower CoG during normal operation.

...I guess I'm defeating the point of a teaser if I tell you guys what it is. :)

Re: pic: 2791 Teaser 1
 

What's your winch looking like so far Chris? Which motors and gearbox.