Chief Delphi - Idler Sprockets

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - Idler Sprockets (http://www.chiefdelphi.com/forums/showthread.php?t=81402)

blayde5

29-01-2010 01:13

Idler Sprockets

Hey guys, we were hoping to use idlers on our drivetrain to give us more clearance while going over the bump.

The problem is we couldn't find any double sprocket idlers on McMaster's website so we had to make use of two single ones.

Does anyone know where we can order double sprocket idlers?

Thanks
- Team 115

dtengineering

29-01-2010 01:32

Re: Idler Sprockets

We've had good success just using rollers. Turn a piece of HDPE or Nylon in a lathe, and put it over a bolt. Not something you'd do in an industrial setting, but usually good enough for a few hours of robot driving... which is all you really need.

Jason

Ken Leung

29-01-2010 02:28

Re: Idler Sprockets

What do you know. Look what I found tonight: http://andymark.biz/alsp.html.

All times are GMT -5. The time now is 08:02.