help with the I/O
 

hEy
i HAVE APROBLEM HOPE U CAN HELP ME!!!:yikes:
we have installed the I/O ,it was okay at the beginning but now after we download a code it seems not connected (the green light at the classmate is not flashing gren) ,do this unit need programming??? because at the messages tap at the classmate shows " Make sure the unit has been programmed"

HELP ME
:ahh:

Re: help with the I/O
 

There is a hex file in the Shared Documents folder that needs to be programmed onto the PSoC board.

However unless you plan on wiring up a custom control panel you don't need to worry about the Cypress I/O module. Most teams only use Joysticks and don't need the I/O and can therefore safely ignore that message.