Chief Delphi - Getting Started With Wireless

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Getting Started With Wireless (http://www.chiefdelphi.com/forums/showthread.php?t=81531)

Alphabet OJ

30-01-2010 16:29

Getting Started With Wireless

Our robot is working with tether, but we are trying to get wireless working. We started with what the manual told us to in Chapter 2 of the Benchtop Test, but that didn't work. When we went to the bridge's IP, it didn't find anything. Do we need to install the router's CD onto the Clamshell? We tried but it didn't work. Thank you!

basicxman

30-01-2010 16:53

Re: Getting Started With Wireless

We're able to download code to a robot wirelessly from any laptop with WindRiver and all the updates. All we did was switch the IP address of the wireless card to 10.xx.yy.z (xx and yy being team number, see manual - Z being a valid IP range). Then just connect to the router and connect to the remote target.

Alphabet OJ

30-01-2010 17:00

Re: Getting Started With Wireless

Thanks, we got it now!

All times are GMT -5. The time now is 02:01.