cRIO wont run software
 

alright, so this year our team had to use the cRIO from last years robot. we've written a teleop code (in labview), and seems to have no errors. however, when i go to deploy the code to the cRIO, it says its expecting a nother version of data or something. im guessing it has to do with updating it, but i cant find any tools or patches.

Re: cRIO wont run software
 

Update your LabVIEW installation, then run the FRC cRIO Imaging Tool to load the v19 image. You will find a pointer to the mandatory update here:

http://www.usfirst.org/frccontrolsystem

While you're at it, make sure your Driver Station is updated as well. If your Dashboard doesn't show a directional compass indicator, you'll have to run the updater twice, first uninstalling then reinstalling the files.

Re: cRIO wont run software
 

i have run the installer before, it shows that i have the image of FRC_2010_v5.zip

is there anyplace i can just load v19 from?

Re: cRIO wont run software
 

If you have v5, the update was not applied successfully.

Follow the links to the LabVIEW update and get a fresh copy of it. Run it to update your development system. Then you'll have the v19 image.

Re: cRIO wont run software
 

thank you yet again alan!