Chief Delphi - rearrange crio modules?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - rearrange crio modules? (http://www.chiefdelphi.com/forums/showthread.php?t=81674)

NerdGuy

01-02-2010 18:51

rearrange crio modules?

Hey so we need to rearrange our crio modules.
dont ask why we just need to.

However when we rearanged the modules and reformated the crio the code does not work. The driver station displays no I/O found. in the diagnostics tab.

Does anyone know how to make this work?

Also we are using Java so that might have something to do with it.

jhersh

01-02-2010 19:05

Re: rearrange crio modules?

Quote:

Originally Posted by NerdGuy (Post 911425)

Hey so we need to rearrange our crio modules.
dont ask why we just need to.

That's a shame... cause it's not possible. The FPGA is compiled to expect certain modules in specific slots.

Quote:

Originally Posted by NerdGuy (Post 911425)

However when we rearanged the modules and reformated the crio the code does not work. The driver station displays no I/O found. in the diagnostics tab.

Not sure what you mean by "displays no I/O found". Displays it where? Is that exactly what it says? This is likely a message about the Cypress I/O board and has nothing to do with moving the modules.

Quote:

Originally Posted by NerdGuy (Post 911425)

Does anyone know how to make this work?

Nope... no one does... since it's not possible.

ebarker

01-02-2010 19:40

Re: rearrange crio modules?

Quote:

Originally Posted by NerdGuy (Post 911425)

Does anyone know how to make this work?

super easy - put the modules in the slots indicated by the manual.

Mark McLeod

01-02-2010 20:03

Re: rearrange crio modules?

You can swap some of the modules:

slot 1 can be swapped with slot 2
slot 4 can be swapped with slot 6
slot 7 can be swapped with slot 8

But that's probably not much help is it?

NerdGuy

01-02-2010 23:45

Re: rearrange crio modules?

*sigh

Just as i had feared, oh well we will just put them back like they were.

Thanks anyway.

jhersh

02-02-2010 00:25

Re: rearrange crio modules?

Quote:

Originally Posted by Mark McLeod (Post 911470)

You can swap some of the modules:

slot 1 can be swapped with slot 2
slot 4 can be swapped with slot 6
slot 7 can be swapped with slot 8

But that's probably not much help is it?

That is inaccurate... While you "can" swap 1 and 2 and you "can" swap 4 and 6, you are required to have a 9201 in slot 1 and a 9403 in slot 4.

-Joe

Mark McLeod

02-02-2010 08:56

Re: rearrange crio modules?

I believe "swap" is accurate, while "move" would not be, except for slots 7 & 8. :)

But it was tongue in cheek.

jhersh

02-02-2010 15:09

Re: rearrange crio modules?

Quote:

Originally Posted by Mark McLeod (Post 911723)

I believe "swap" is accurate, while "move" would not be, except for slots 7 & 8. :)

But it was tongue in cheek.

Fair enough. :) This whole topic is a bit comical.

SovietChaoz

12-02-2010 17:52

Re: rearrange crio modules?

so can you move the ni 9472 module to a slot other than 8 or 7?

jhersh

12-02-2010 18:10

Re: rearrange crio modules?

Quote:

Originally Posted by SovietChaoz (Post 918801)

so can you move the ni 9472 module to a slot other than 8 or 7?

No.

All times are GMT -5. The time now is 23:21.