Problems with Tank Mode and Wireless Connection
 

We have programmed our robot to function in Tank mode, however after uploading the new program we are only allowed to operate in Arcade mode.
Also, we are having problems connecting wirelessly. We have reset and reconfigured both the wireless router and the gaming adapter. Any suggestions?

Re: Problems with Tank Mode and Wireless Connection
 

For help with the code, either post a picture or better yet the vi itself.

I helped a rookie team that had wireless troubles due to unexpected settings on the bridge. Check the other settings not mentioned in the Control System manual to disable any extra security and verify your SSID is correct. Since the wired operation works, just concentrate on the wireless settings and compare the router and bridge.

Re: Problems with Tank Mode and Wireless Connection
 

tank drive was a problem, i had to rewrite to Labveiw code in the begin and tele-op vi's completely from the ones that come with a new project i will post one that i have known to work.

Re: Problems with Tank Mode and Wireless Connection
 

We have also same problems with wireless connection and programming. If you can't make the robot code green in driver mode you have not to close the Labview Imageing Tool while you are working on it in developer mode.

Re: Problems with Tank Mode and Wireless Connection