Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   842 ball roller (http://www.chiefdelphi.com/forums/showthread.php?t=81712)

falconmaster 02-02-2010 12:07
842 ball roller
 
sorry, we removed the post. We will post another one

Chris is me 02-02-2010 12:37
Re: 842 ball roller
 
Have you prototyped at different speeds (mainly, much slower)? In our much less precise, "play for 5 minutes with a drill" test, it seemed to work a little better moving slower. You guys have almost certainly put more work into yours, so I'm interested in seeing what decisions you made with the roller as it stands now.

Also, why not run a pully from the FP to the shaft directly instead of a speed increase and reduction in time?

Thanks for posting this. Everything I can learn about other team's backspin rollers helps out my team's design. :D

falconmaster 02-02-2010 12:42
Re: 842 ball roller
 
Quote:
Originally Posted by Chris is me (Post 911817)
Have you prototyped at different speeds (mainly, much slower)? In our much less precise, "play for 5 minutes with a drill" test, it seemed to work a little better moving slower. You guys have almost certainly put more work into yours, so I'm interested in seeing what decisions you made with the roller as it stands now.

Also, why not run a pully from the FP to the shaft directly instead of a speed increase and reduction in time?

Thanks for posting this. Everything I can learn about other team's backspin rollers helps out my team's design. :D
Sorry I had a typo 15000 to 5000 not 1500 to 50000

Mr_I 02-02-2010 12:44
Re: 842 ball roller
 
Since the original post was removed, my comments are no longer applicable.


All times are GMT -5. The time now is 08:27.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi