Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Labview Driver Station issues (http://www.chiefdelphi.com/forums/showthread.php?t=81740)

GunfighterJ 02-02-2010 17:56
Labview Driver Station issues
 
When we turn on our classmate pc and it boots into the driver account, we are successfully able to connect to the robot through the wireless bridge. But if we power cycle the robot then we are unable to establish a connection. We have to restart our classmate pc to get another connection. Is there anyway to reconnect without having to restart the classmate pc?

Joe Ross 02-02-2010 19:17
Re: Labview Driver Station issues
 
Quote:
Originally Posted by GunfighterJ (Post 912006)
When we turn on our classmate pc and it boots into the driver account, we are successfully able to connect to the robot through the wireless bridge. But if we power cycle the robot then we are unable to establish a connection. We have to restart our classmate pc to get another connection. Is there anyway to reconnect without having to restart the classmate pc?
It's a known bug in the driver station software, that will be fixed (hopefully soon). You should be able to reboot just the cRIO using the reset button instead.

Greg McKaskle 03-02-2010 08:52
Re: Labview Driver Station issues
 
Technically it isn't a bug in the DS, but a bug with the bridge. The DS is reprogrammable, so we have the ability for the bridge to work around the bridge issue.

Greg McKaskle

hamosad1657 03-02-2010 15:02
Re: Labview Driver Station issues
 
We were posted a guide for fast connection, use it instead.


All times are GMT -5. The time now is 11:47.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi