USB Encoder to ClassMate PC
 

We are looking into attaching a USB Encoder to the Clasmate PC for robot control. Has anyone successfully hooked a USB Encoder to the ClassMate PC and had the input processed by the cRio? If so, how did you do it? Please, don't tell me if you think it will work. We need to know if it will really work.

Re: USB Encoder to ClassMate PC
 

I googled for usb encoder, and besides video encoders, I found two different devices. Once was from phidgets, the other from us digital. Neither of their manual mentioned HID or joystick, so I think it's very unlikely that they work out of the box with the driver station software. If the device you are looking at has programmable firmware, you could probably make it look like a joystick by following the HID protocol and make it work.

Now, for another solution to the problem. Did you realize that the cypress I/O module has 2 quadrature inputs if you put it in extended I/O mode?

Re: USB Encoder to ClassMate PC
 

Joe, you are the man.

We were looking at the Phidget encoder, but I will redirect to look over the Cypress board I/O.

Thanks a bunch.