Crate Size Question
 

Re: Crate Size Question
 

I don't recall ever seeing a minimum height requirement in the rules. There is a maximum.

Re: Crate Size Question
 

Yes there are minimums !!

Read the manual (probably never heard that one before) and in section 4.6.1 there are min AND max dimensions.

The 4.6.1.2 specifys the minimum requirement.

The crate must be forkliftable, pallet jackable, stackable, and durable.

Re: Crate Size Question
 

Thanks for the reminder to always read the rules. There is a minimum width, but I saw no miniumum height (aside from that implied by the requirement to have 4x4 skids on the bottom of the crate). There is definitely a maximum height. If there is a minimum height, could you please quote the applicable rule? I could have missed something.

http://usfirst.org/roboticsprograms/...nt.aspx?id=452

Re: Crate Size Question
 

From my rules interpretation:

No minimum height, just a max.

Minimum width has to be 28 for the forklift/pallet jack tongs, plus 4" skid + 4" skid + allow 2 inches for tong clearance.

The 2 inch tong clearance is my suggestion. You need some additional space between the skids for the tongs to easily enter/exit.

That means the outside width needs to be 38" min to meet forklift requirements.

Re: Crate Size Question