Toughbox stall torque
 

Just a quick question, does anyone know the stall torque of two CIM motors in an un-modified toughbox?

Thanks in advance

Re: Toughbox stall torque
 

About 56 Newton-Meters

Re: Toughbox stall torque
 

For about 5 seconds :p

Re: Toughbox stall torque
 

Be careful. You should be engineering for 1/2 stall torque or less to get the maximum power out of your motors. In addition, the CIM's stall at 129 amps and you are only allowed 40 amp breakers.

Re: Toughbox stall torque
 

We know that, we just used that as an indicator in order to compare the torque between a regular toughbox with two CIMs and a 1:25 transmission with only one CIM; thanks for the quick replays =)