Re: Use of Globe Motor from 2009 KOP?
 

Thank you all for your contributions to this question. We did succeed in separating the gearbox and the motor. For those who would like to know how, here are the steps we took:
1- Separate the outside cover by knocking out the three roll pins.
2- Pull off the housing by spinning and twisting.
3- Undo the two top torques.
4- Pull the motor assembly apart.
5- Put the housing in a vice and then knock out the shaft so that the motor assembly is separated from its insides.
6- The motor is now separated from the gearbox, you're on your own from here.

Thanks again for all the help,

ASTECHZ 2994 :)