Chief Delphi - rack and pinion problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - rack and pinion problem (http://www.chiefdelphi.com/forums/showthread.php?t=82241)

nievz23

09-02-2010 11:16

rack and pinion problem

a rack and pinion is used to drive a gate mechanism. The pinion has module of 12, 11 teeth and a pressure angle of 25. Solve for the details for each gear profiles.:confused: :confused: :confused:

Shaft diameter = 30 mm
Hub diameter = 60 mm
Keyway = 8x8

All times are GMT -5. The time now is 14:38.