Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Finished Teams (http://www.chiefdelphi.com/forums/showthread.php?t=82331)

Ratchet1 10-02-2010 14:25

Re: Finished Teams
 
Well thanks to the snow all we have a chassis with some wheels. Our pneumatics came in, and we havent been able to do anything yet because we havent been able to go anywhere. So we are basically screwed for the competition. This is only our second year, so we are still learning about how fast that deadline comes up haha. baring any type of miracle we aren't gonna be ready.

V_Chip 10-02-2010 14:28

Re: Finished Teams
 
"Finished Teams"??? :ahh:

That's an absurd ideal. :yikes:

waialua359 10-02-2010 15:07

Re: Finished Teams
 
#1 I hope we finish in time.
#2 I hope its to our satisfaction.

So far, we are not even close to reaching #1 and #2 yet.:mad:

Akash Rastogi 10-02-2010 15:07

Re: Finished Teams
 
"DONE is a four letter word" JVN

Our competition bot is farther along than our practice bot. Hopefully the snow doesn't make us take off another day from our machines at school tomorrow.

ATannahill 10-02-2010 15:16

Re: Finished Teams
 
Wait, robot? We've been working on building a team.

The website and communication teams have been working hard and shown much success.
Our CA essay is going through some final edits.
The video is mostly shot and editing has begun.
Our WFA nominee has been decided and the essay is a good way along.
The Business plan has been updated.
Our robot is behind schedule and needs plenty of work to be functional.

waialua359 10-02-2010 15:22

Re: Finished Teams
 
Quote:

Originally Posted by rtfgnow (Post 917241)
Wait, robot? We've been working on building a team.

The website and communication teams have been working hard and shown much success.
Our CA essay is going through some final edits.
The video is mostly shot and editing has begun.
Our WFA nominee has been decided and the essay is a good way along.
The Business plan has been updated.
Our robot is behind schedule and needs plenty of work to be functional.

Well based on your team's track record, I believe you based on the success you folks have year after year.:ahh:

Kage 10-02-2010 15:27

Re: Finished Teams
 
Quote:

Originally Posted by synth3tk (Post 917069)
Exactly. Why do you think we have pit areas? ;) I rarely see a team that is ever done with their robot, even during competition.

When my team went down to the Florida riegional last year, the team in the pit next to us started out with a bunch of flow-jet pieces and bolts and motors on practice day, and had a fully functioning robot halfway through the qualifying day lol

it was interresting to watch it come together the way it did.

synth3tk 10-02-2010 16:27

Re: Finished Teams
 
Quote:

Originally Posted by rtfgnow (Post 917241)
Wait, robot? We've been working on building a team.

That was deep. Thanks for reminding us all. :cool:

nikeairmancurry 10-02-2010 17:11

Re: Finished Teams
 
Finished.. I was replacing parts on our 2008 robot a few weeks ago... No Robot is ever finished 100%... Is it to the point were it does just about everything you wanted.. Mostly likely...

O'Sancheski 10-02-2010 19:40

Re: Finished Teams
 
Quote:

Originally Posted by Daniel_LaFleur (Post 917064)
Nobodys ever really finished with their robot ;)

that is so true... in 2007 we didn't finish our robot until our second competition, but i know of a few teams including us that are close to coming to a ship worthy robot

Jordan2389Diaz 12-02-2010 09:48

Re: Finished Teams
 
:cool: I do agree that some people are not finished with building their robot a little before practice time because my team had several welds break when we got our robot out of the crate.:cool:

Lord is my Shepherd I shall not want. -Psalms 23

Jon Stratis 12-02-2010 10:52

Re: Finished Teams
 
Our 2008 robot was finished... after the first day of our second competition.

Then our summer session came around and we decided to do "improvements", for the sake of learning and experimenting.

Other than that... we've gotten to points where we were satisfied with the other robots, but never finished.

This year? The drive motors have been attached for a while and the wheels were finished last night (so we should have the drive train completed tomorrow). One mechanism is complete and attached. A second mechanism is almost done (just needs a little tweaking), and the other two mechanisms are in progress. Electronics aren't mounted on the robot yet, but the individual boards are done, wire lengths measured, cut and soldered, for the most part. Electronics go on tomorrow afternoon, if all goes well.

thefro526 12-02-2010 10:58

Re: Finished Teams
 
Last year, our machine was "Ready To Ship" in the middle of week 4.

In 2008 our machine was "Ready To Ship" At the end of week 5.

This year, our machine might be "Ready To Ship" on Ship Day. Snow, Lack Of Commitment, Shipping Delays, Lack Of Man Power, and other things are working against us this year...

MrForbes 12-02-2010 11:01

Re: Finished Teams
 
Last year we put a finished robot in the crate. We did modify it at our first regional, but that was after some practice/qualifying rounds revealed that we should change tactics.

This year we're a bit behind, but we should have it finished by ship day. We have driving, kicking, and ball handling stuff working, but still need to design and build the upper part and outer coverings. And work on programming and testing and driver practice.

JaneYoung 12-02-2010 11:03

Re: Finished Teams
 
Quote:

Originally Posted by thefro526 (Post 918520)
This year, our machine might be "Ready To Ship" on Ship Day. Snow, Lack Of Commitment, Shipping Delays, Lack Of Man Power, and other things are working against us this year...

Lack of commitment is a biggie. A team can always find a way to deal with the challenges that come its way. That said, dealing with lack of commitment on the part of team members can make for a difficult build and competition season.

Hang in there,
Jane


All times are GMT -5. The time now is 19:19.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi