![]() |
Finished Teams
:confused: Is there any team that is finished with their robot?:confused:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
except the Robonauts lol :rolleyes:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Some things that have been said in the past on this topic (most of which are already spotlighted):
"Finish. What an interesting concept. I'm still hoping to do that to our 2003 robot." --a member of 222 in 2005 "I know what finished is, and I know what a robot is, but what is this finished robot of which you speak?"--a member of a different team "Your robot isn't done until after the last day of the Championships." "No, it's not done until after your last offseason." --exchange from a year or two ago. Anybody says they're finished, they still got work to do. It's probably just in software. |
Re: Finished Teams
wheres the 4th option? what about the teams who arent even half way finished because of snowmaggedon? (we only have a chassis, wheels and transmissions mounted. no electronics or mechanisms of any kind...yet)
|
Re: Finished Teams
We don't finish until we're eliminated at the Championship. If you claim to be finished any sooner we're not playing the same game.
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
I don't think the question should be are you finished? Something like have you come to a point were you are satisfied with your robot until you see it in competition?
Lol but agreed with all above posters if u finish before the season is over your giving up waaay to soon. |
Re: Finished Teams
I don't really consider any of 1075's robot's 'finished', (2003, 2004, 2006, 2007, 2008, 2008offseason, 2009, 2010, 2010practice or our 2008-2010 Cart). However, some of them have been completely or partially dismantled, mostly because we needed parts off of them:
2003 exists, minus all electronics and some pneumatics 2004 exists minus electronics 2006 is completely dismantled and some of its frame lives on in more recent bots 2007 is mostly functional, but is missing drive units (2006 offseason, 2007, 2008, and 2008 offseason all had interchangeable drive units) 2008 is completely dismantled, some frame bits live on in more recent bots 2008offseason is fully functional 2009 was fully functional until last week (its cRIO and modules were stolen to put on 2010practice) 2010 is still under construction 2010practice is mostly complete. and our 2008-2010 Cart is fully functional. |
Re: Finished Teams
Quote:
2791 was aiming for that by about now. Our chassis is in a million pieces, so... we're a bit behind. I can say the 09 robot has been finished since Ramp Riot, though, as almost every single part on it has been cannibalized. I'm actually impressed with how much of it HAS been reused. ETA: IRI 2010. We'll be done then. |
Re: Finished Teams
Well thanks to the snow all we have a chassis with some wheels. Our pneumatics came in, and we havent been able to do anything yet because we havent been able to go anywhere. So we are basically screwed for the competition. This is only our second year, so we are still learning about how fast that deadline comes up haha. baring any type of miracle we aren't gonna be ready.
|
Re: Finished Teams
"Finished Teams"??? :ahh:
That's an absurd ideal. :yikes: |
Re: Finished Teams
#1 I hope we finish in time.
#2 I hope its to our satisfaction. So far, we are not even close to reaching #1 and #2 yet.:mad: |
Re: Finished Teams
"DONE is a four letter word" JVN
Our competition bot is farther along than our practice bot. Hopefully the snow doesn't make us take off another day from our machines at school tomorrow. |
Re: Finished Teams
Wait, robot? We've been working on building a team.
The website and communication teams have been working hard and shown much success. Our CA essay is going through some final edits. The video is mostly shot and editing has begun. Our WFA nominee has been decided and the essay is a good way along. The Business plan has been updated. Our robot is behind schedule and needs plenty of work to be functional. |
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
it was interresting to watch it come together the way it did. |
Re: Finished Teams
Quote:
|
Re: Finished Teams
Finished.. I was replacing parts on our 2008 robot a few weeks ago... No Robot is ever finished 100%... Is it to the point were it does just about everything you wanted.. Mostly likely...
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
:cool: I do agree that some people are not finished with building their robot a little before practice time because my team had several welds break when we got our robot out of the crate.:cool:
Lord is my Shepherd I shall not want. -Psalms 23 |
Re: Finished Teams
Our 2008 robot was finished... after the first day of our second competition.
Then our summer session came around and we decided to do "improvements", for the sake of learning and experimenting. Other than that... we've gotten to points where we were satisfied with the other robots, but never finished. This year? The drive motors have been attached for a while and the wheels were finished last night (so we should have the drive train completed tomorrow). One mechanism is complete and attached. A second mechanism is almost done (just needs a little tweaking), and the other two mechanisms are in progress. Electronics aren't mounted on the robot yet, but the individual boards are done, wire lengths measured, cut and soldered, for the most part. Electronics go on tomorrow afternoon, if all goes well. |
Re: Finished Teams
Last year, our machine was "Ready To Ship" in the middle of week 4.
In 2008 our machine was "Ready To Ship" At the end of week 5. This year, our machine might be "Ready To Ship" on Ship Day. Snow, Lack Of Commitment, Shipping Delays, Lack Of Man Power, and other things are working against us this year... |
Re: Finished Teams
Last year we put a finished robot in the crate. We did modify it at our first regional, but that was after some practice/qualifying rounds revealed that we should change tactics.
This year we're a bit behind, but we should have it finished by ship day. We have driving, kicking, and ball handling stuff working, but still need to design and build the upper part and outer coverings. And work on programming and testing and driver practice. |
Re: Finished Teams
Quote:
Hang in there, Jane |
Re: Finished Teams
While many (most??) years we tend to ship a student in the crate (thank GOD that GSR is a week 1 event! :p ), I think we're in very good shape to actually get some solid practicing in. A good crop of motivated and/or talented freshmen meant that the Mech shop was a beehive of activity most nights ... the way we always dreamed it could be.
Now, can we keep the enthusiasm up for another 10 days ... ? |
Re: Finished Teams
WE ARE FINISHED!!!! With 2005,2006 and 2007.....the kids disassembled them and put the material back on the shelf. They are truly finished!!!:D
|
Re: Finished Teams
We had a mostly finished robot until about 5 weeks ago; we had to disassemble our 2009 bot, frame and all, for use in our 2010 chassis. By my estimation, around 50% of our 2010 chassis is made up of parts taken from the 2009 robot.
Most of our subsystems are in a state of semi-completion. We finally finished our chassis last week. The swerve modules and steering motor sprocket supports are done and mounted. Our kicker works in prototype form; the pull-back mechanism is in mid-assembly as I type this. Our ball controller just needs to have its motor mounted on the frame. And our robot lifting device is...uh...coming along. We'll have a working robot by ship date, if all goes well. It won't be finished for a few years, providing that it lasts through future competitions. |
Re: Finished Teams
I'm shocked that there is no option of "less than halfway finished". :P
should we round up? |
Re: Finished Teams
Snowmageddon! What a perfect way to describe this whitish third circle of h***. We were ahead a bit in week three then 4 feet of snow or so later we are still locked out of our school.
Uggghhhhhh! |
Re: Finished Teams
Well, as of today, our robot drives, kicks and everything else it's supposed to do. but there is room for improvement so I'm not calling it finished.
|
Re: Finished Teams
Haha. Done. Wait, do you mean you actually have to have your chassis *assembled* to be done? It can't just be lying on the shop floor in oh-so-many pretty pieces?
...Yeah. We might be behind. We're going to put in so many hours this week it'snotevenfunny. |
Re: Finished Teams
We seem to be stuck between "almost finished" and "finished"
The only thing left to do is: Add permanent grip to our ball magnet, Load the full competition code, Add a Lexan "roof" to keep balls off the top. Other than that, only cosmetic details(lexan siding, sponsor-stickers,etc) And the robot is going to be underweight this year :D |
Re: Finished Teams
:cool: Four days left I can feel the tension building.:cool:
|
Re: Finished Teams
Jordan, is it time for us to panic yet?
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
Quote:
|
Re: Finished Teams
:cool: Is there anymore teams that is finished?:cool:
|
Re: Finished Teams
we just finished last night, got our autonomous working which is a first for our team to be done with a great autonomous before we ship
|
Re: Finished Teams
:mad: My Thread "An Official Declaration of Rebellion Pt.1" just got deleted or something can anyone help me and tell me how to get it back?:mad:
|
Re: Finished Teams
:cool: Is there anymore teams that are finished?:cool:
|
Re: Finished Teams
:cool:I suppose everyone is about finished now.:cool:
|
Re: Finished Teams
Quote:
... But we're ready for our week one regional :D |
| All times are GMT -5. The time now is 19:19. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi