Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)
-   -   Withholding limits and GP (http://www.chiefdelphi.com/forums/showthread.php?t=82443)

Bochek 11-02-2010 21:59

Withholding limits and GP
 
Lets use an example robot,

Naked (no battery or bumpers) it weights 39 lbs. Could the team ship just the bumpers? and keep the robot under the withholding allowance?

Do you feel that this is un-GP?

- Bochek

big1boom 11-02-2010 22:09

Re: Withholding limits and GP
 
This is allowed, however it is close to impossible to develop a successful robot that weighs <40 pounds including all mechanisms.

Chris is me 11-02-2010 22:11

Re: Withholding limits and GP
 
If you actually accomplished this, I'd be so impressed! I don't think there are any GP issues at stake here.

ttldomination 11-02-2010 22:16

Re: Withholding limits and GP
 
Quote:

Originally Posted by Bochek (Post 918281)
Lets use an example robot,

Naked (no battery or bumpers) it weights 39 lbs. Could the team ship just the bumpers? and keep the robot under the withholding allowance?

Do you feel that this is un-GP?

- Bochek

Really? REALLY???

Bochek 11-02-2010 22:16

Re: Withholding limits and GP
 
our bot currently sits at 60lbs with battery and bumpers, so its gonna be mighty close, might ship the bumpers and the lexan covers? mabie the digital side car and signal light? perhaps even the digital module from the crio.

i think that would be enough

kevin.li.rit 11-02-2010 22:22

Re: Withholding limits and GP
 
The Withholding Allowance allows you to withhold fabricated parts, not the Robot. It seems like only a partially disassembled robot would fit under the withholding allowance.

ebarker 11-02-2010 22:22

Re: Withholding limits and GP
 
C'mon guys.....

The intent is you will ship a robot on the ship date AND you are allowed to have a limited supply of spare parts AND you are hands off on your bot on the ship date.

If you want to 'lawyer' the rules go ahead but IMHO it wouldn't be in the spirit of things.

kevin.li.rit 11-02-2010 22:27

Re: Withholding limits and GP
 
Quote:

Originally Posted by ebarker (Post 918295)
C'mon guys.....

The intent is you will ship a robot on the ship date AND you are allowed to have a limited supply of spare parts AND you are hands off on your bot on the ship date.

If you want to 'lawyer' the rules go ahead but IMHO it wouldn't be in the spirit of things.

I agree. I wasn't trying to lawyer the rules. The Withholding allowance shouldn't be used to withhold a robot.

Chris_Elston 11-02-2010 22:45

Re: Withholding limits and GP
 
ROBOT - A FRC ROBOT is a remotely operated vehicle designed and built by a FRC team to perform specific tasks when competing in the 2010 competition “Breakaway.” The ROBOT must include all the basic systems required to be an active participant in the game – power, communications, control, mobility, and actuation. The ROBOT implementation must obviously follow a design approach intended to play the 2010 FRC game (e.g. a box of unassembled parts placed on the FIELD, or a ROBOT designed to play a different game, would not satisfy this definition).

We have to ship a "robot" and the definition of a robot is above. Hope that helps.

Mike Betts 11-02-2010 23:21

Re: Withholding limits and GP
 
Quote:

Originally Posted by Chris_Elston (Post 918309)
ROBOT - A FRC ROBOT is a remotely operated vehicle designed and built by a FRC team to perform specific tasks when competing in the 2010 competition “Breakaway.” The ROBOT must include all the basic systems required to be an active participant in the game – power, communications, control, mobility, and actuation. The ROBOT implementation must obviously follow a design approach intended to play the 2010 FRC game (e.g. a box of unassembled parts placed on the FIELD, or a ROBOT designed to play a different game, would not satisfy this definition).

We have to ship a "robot" and the definition of a robot is above. Hope that helps.

Chris,

With all due respect, the withholding allowance, by design, invalidates requirement to ship a "robot" by this definition.

From the blue box of <R27>:

Quote:

The primary intent of this rule is to allow teams to withhold the ROBOT control system, the OPERATOR CONSOLE, and selected relevant subsystems, and access them after the shipping deadline. This will allow teams to have the maximum time possible prior to each competition event to develop and complete the software for their ROBOT while maximizing the potential capabilities provided by the control system.
By defiition, without a control system, you have no robot. But the intent of <R27> is to withhold the control system.

Here lies the rub...

For a very light robot design, the "selected relevant subsystems" can be all of them.

Going back to the origins of this thread, it is clear to me that shipping the bumpers only is legal if the remaining system, sans battery, is less than 40 pounds.

The question is if the sacrifice of a massive robot is offset by additional development time...

A most interesting trade off study...

JMHO,

Mike

Phoenix Spud 11-02-2010 23:42

Re: Withholding limits and GP
 
Mike,

Just a friendly reminder, the blue boxes are not part of the rules and can be wrong. According to the rules, they are there to explain the intent behind the rules. In general, they are a rule of thumb, not a rule.

kevin.li.rit 11-02-2010 23:48

Re: Withholding limits and GP
 
Quote:

Originally Posted by Mike Betts (Post 918319)
Chris,

With all due respect, the withholding allowance, by design, invalidates requirement to ship a "robot" by this definition.

I disagree. I don't think an entire robot should fall under a Fabricated part. But really only the First Q&A should be the final decider.

EricH 11-02-2010 23:59

Re: Withholding limits and GP
 
As I see it, the question is simple: Can a reasonably complete robot go into the withholding allowance?

Let's discuss this from the rules.

First, what is the withholding allowance?
Quote:

WITHHOLDING ALLOWANCE – A limited amount of FABRICATED ITEMS that are withheld from the ROBOT shipping requirements (specified in Section 4) and retained by the team following the shipping deadlines. These items are then hand-carried to a competition event by the team. The OPERATOR CONSOLE is automatically included in the WITHHOLDING ALLOWANCE. Beyond that, the incoming material maximums specified in Rule <R38> limits the amount of FABRICATED ITEMS included in the WITHHOLDING ALLOWANCE.
"Limited amount withheld from the robot" implies--note that it doesn't specifically say one way or the other--that you can't hold back your entire robot.

What is supposed to be shipped at the end of the build season?
Quote:

<R26> [stuff that is general build season info]When the ROBOT shipment deadline arrives, all work on the ROBOT must cease and the ROBOT must be placed in a “hands-off” condition. The entire ROBOT (including all FABRICATED ITEMS intended for use during the competition in alternative configurations of the ROBOT) must be crated or bagged (as appropriate for your event), and out of team hands by the shipment deadline specified in Section 4 (with the exception of the items covered by the WITHHOLDING ALLOWANCE).
OK, so the entire robot must be crated or bagged, along with everything else, unless it's in the allowance.

Quote:

<R27> During the period between ship date and the competitions: During this period, all teams may manufacture SPARE, REPLACEMENT, and UPGRADE PARTS, and develop software for their ROBOT at their home facility.
C. Teams may continue development of any items retained under the WITHHOLDING ALLOWANCE, continue to work on them during this period, and then bring them to the competition events.
D. The total weight of the FABRICATED ITEMS (SPARE, REPLACEMENT, and UPGRADE PARTS, plus all WITHHOLDING ALLOWANCE items) worked upon during this period and brought to the competition event(s) must not exceed the limits specified in Rule <R38>.
Next up, the rules on what you can do with the stuff in the allowance. Pretty much fair game.

Quote:

<R38> Teams may bring a maximum of 40 pounds of custom FABRICATED ITEMS (SPARE PARTS, REPLACEMENT PARTS, and UPGRADE PARTS, plus all WITHHOLDING ALLOWANCE items) to each competition event to be used to repair and/or upgrade their ROBOT at the competition site. All other FABRICATED ITEMS to be used on the ROBOT during the competition shall arrive at the competition venue packed in the shipping crate or lockout bag with the ROBOT.
A. Exception: the OPERATOR CONSOLE is not included in the incoming parts weight restriction.
Aha! Here we have the definition of what exactly constitutes the allowance. Note that it includes 40 lbs of custom fabricated items from all categories.

Note that nowhere does any rule explicitely say, "Thou shalt not keep your entire robot as your withholding allowance." However, the rules certainly imply that you cannot keep your entire robot as withholding, even if it is under 40 lbs.

What I am going to say is this memorable quote from a Q&A back in 2008 in response to a very...err..."inventive" team: "That would be a violation of the spirit, but not necessarily the letter, of the rules." (Also note that someone figured out a way to bring a complete second robot to an event a few years back, and nobody's done it yet to my knowledge...)

Tom Line 12-02-2010 00:01

Re: Withholding limits and GP
 
In the end, only Q&A can answer the question as to whether it meets the rules.

In the end, only YOU can decide whether you feel good about the decisions you made and whether or not they were in the spirit of the rules.

Ian Curtis 12-02-2010 00:54

Re: Withholding limits and GP
 
Quote:

Originally Posted by EricH (Post 918342)
What I am going to say is this memorable quote from a Q&A back in 2008 in response to a very...err..."inventive" team: "That would be a violation of the spirit, but not necessarily the letter, of the rules." (Also note that someone figured out a way to bring a complete second robot to an event a few years back, and nobody's done it yet to my knowledge...)

And, because it's relevant to this thread, does anyone know Speed Racer's weight? IIRC, Fezzik was 80-something lbs, so if you shipped the bumpers, and you're control board was just the joysticks on a piece of paper, you could probably get a robot and controls in in under 40 lbs.

($5 says that if/when submitted to the Q&A this approach will be deemed against the rules.) :cool:


All times are GMT -5. The time now is 02:05.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi