Chief Delphi - Does anyone have outside dims for the GEM 500?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Does anyone have outside dims for the GEM 500? (http://www.chiefdelphi.com/forums/showthread.php?t=82493)

Does anyone have outside dims for the GEM 500?

Hello Folks,

Does anyone who has used a GEM 500 planetary from Andy Mark have exterior dimensions of the transmission? I am interested in the 3 stage version (AM-0401)

I can't find any of this information on the AM website. The closest I can find is a drawing of the mounting plate accessory which I can glean a little information from.

I would like to know how long the gearbox body is, the diameter of the gearbox body, the length of the shaft and the mounting hole pattern and hole size/thread.

Does anyone have this information? I have emailed AM but I am sure they are buried right now and I need info as soon as possible.

Thank you,

Rob

Re: Does anyone have outside dims for the GEM 500?

Thanks! I will try to guess the length from the 2 stage drawing but this has most of the information.

Thank you again.

Rob