Software update?
 

How long has this been posted?
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1534

I knew NI had said they would issue an update but hadn't heard anything about it, so I checked the website. I now have cRIO image v20, up from v19.

Eric

Re: Software update?
 

Looks like the Driver Station also has an update. Version 1.1

http://joule.ni.com/nidu/cds/view/p/lang/en/id/1535

Mike U.

Re: Software update?
 

Interesting that they haven't posted anything about it on the FRC website...

Re: Software update?
 

I just stumbled on to these updates this morning!

It would be nice if the NI site gave the actual date of update
in the Release Date field - it says 01-2010 although
the update seems to have come out yesterday.

The US FIRST site says the update is from 09-Jan-2010 !

To sum up as of this morning, there are 2 updates:

- Mandatory LabView Second 2010 update
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1534

- Mandatory Driver Station Second Update
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1535

I have not yet applied either of these so not sure what may work or break after these updates! So save your settings etc., before you try these.

Thanks

Re: Software update?
 

they seem to be behind of updating updates. they just announced there were C++ and java updates (not from the 9th anymore): http://usfirst.org/roboticsprograms/....aspx?id=10934

Re: Software update?
 

Where did you find the v20 update? We still only have v19.
Thanks!

Re: Software update?
 

Have you installed the labview update?

Re: Software update?
 

It would also be nice to know what was updated. For example, we submitted a concern on the FIRST forums about the DS not reading the d-pad on a gamepad correctly. We have since worked around this by adjusting our control scheme, but it would be nice to know if/when it's fixed so that we can go about our original plans.

Has anyone found release notes? I haven't installed it yet, but I don't remember any release notes on the last update. Maybe I'll come across it this time.

Re: Software update?
 

we updated to v20 today and now netbeans is complaining that we're on v20 (it's looking for v19) any thoughts?

thanks

Re: Software update?
 

We are in the same situation...did the mandatory labview update, updated the CrIO, which is now at v20. NetBeans now gives us the message, "Expected version FRC_2010_v19.zip;"

Re: Software update?
 

This is probably why it wasn't announced yet. I'd reccomend going into Tools > Plugins, and checking for updates there.

Re: Software update?
 

We have the exact same problem, anyone have any thoughts?

Re: Software update?
 

I saw this this morning, and downloaded and installed the update.

Don't make the same mistake. Netbeans refuses to download code (as others have said, because it's looking for image v19).

After scrounging the v19 image off of another machine, I tried reimaging with the updated software. I must've tried 5 or 6 times with no luck on two machines. Reimaging with a non-updated machine worked like any other re-imaging.

Downdating with the v2.0 LabVIEW update won't work because there's a newer software version installed. You'll either have to uninstall and reinstall the software or find another computer to reimage it.

After the successful reimaging, I'm now having an issue where I get:
which never completes. But it might need to go in another thread.


EDIT: Nevermind, I just had to let the cRIO sit, off, for a little. Code now downloads.

Re: Software update?
 

If you follow the link for Jan 9th updates, you will see that they are pointing to the new versions now.
:mad:

After applying the patch 4.2 to fix the problems created by C++ update 4.1, We get the "reference to undefined symbol" errors for
_ZN10AxisCamera11GetInstanceEv ... etc.

Re: Software update?
 

We are having the same problem with "undefined symbol" error for ZN10AxisCamera11GetInstanceEv. Has anyone figured out a way to fix this?

Re: Software update?
 

The link to the following list of changes was posted on the NI FIRST community: http://digital.ni.com/public.nsf/all...2576C8004CC32D

Re: Software update?
 

1. Has anyone successfully installed these updates and overcome all errors?
2. Any idea what happens to project work done/saved in Labview before the update, after the updates are installed?

Re: Software update?
 

I've tried to update http://controlsystem.neofra.com with the latest software links in the table on the top of the main page, to the best of my knowledge.

Let me know if I missed something.

Re: Software update?
 

Your code remains untouched.
Just Build again after the LabVIEW update and reimage the cRIO before downloading it.

P.S.
I didn't have any issues with LabVIEW.
I'm working with Windriver now, but haven't tested yet.

Re: Software update?
 

Thanks, Mark...

Re: Software update?
 

one of the only changes was to the holonomic drive vi to include the Cartesian and polar settings but even if you have this vi your code wont change

Re: Software update?
 

As a temporary workaround, we found a solution by editing the file sunspotfrcsdk/ant/upgrade.xml.

In this file, if you change FRC_2010_v19.zip to FRC_2010_v20.zip then the code will download and execute on the cRIO with the V20 image.

Note: There may need to be other changes to the Java Netbeans plugins for complete support of V20. This solution appears to work for our code so far.

Re: Software update?
 

I can confirm editing the sunspotfrcsdk/ant/upgrade.xml file seems work for us as well.

Re: Software update?
 

We updated successfully (we're using LabVIEW). BIG improvement. We were having a lot of communication problems when using wireless. No issues anymore.