Chief Delphi - pic: Teaser of the frame and bumpers

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Teaser of the frame and bumpers (http://www.chiefdelphi.com/forums/showthread.php?t=82565)

pic: Teaser of the frame and bumpers

Re: pic: Teaser of the frame and bumpers

This system looks strong enough but wouldn't you need to recess the black brackets into the plywood so that the plywood is touching the channel or put spacers between each bracket

Re: pic: Teaser of the frame and bumpers

See this thread: http://www.chiefdelphi.com/forums/sh...t=bumper+frame

Your black bracket on the back of the bumper seems to fall into one of those designs. The question is whether that will be considered in compliance with <R07-I>:

Quote:

I. BUMPERS must attach to the FRAME PERIMETER of the ROBOT with a rigid fastening system to form a tight, robust connection to the main structure/frame (e.g. not attached with Velcro). The attachment system must be designed to withstand vigorous game play – nut and bolt fasteners are recommended. All removable fasteners (e.g. bolts, locking pins, pip-pins, etc.) will be considered part of the BUMPERS.

(emphasis mine)