Chief Delphi - Can not connect to cRIO

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Can not connect to cRIO (http://www.chiefdelphi.com/forums/showthread.php?t=82603)

z.s.tar.gz

13-02-2010 16:47

Can not connect to cRIO

We are trying to run the sample robot code, but we keep getting this:

Code:

Error connecting to 'VxWorks6x_10.32.42.2' (Registry localhost). Failed to launch target server

Possible casused by: back-end not connected



Remove dead entry from registry!

What could be causing this?

Chasegd128

13-02-2010 17:41

Re: Can not connect to cRIO

We had the same problem. We re-imaged the cRIO and it then decided to work. So your best bet would be to re-image it. Good luck!

byteit101

13-02-2010 19:06

Re: Can not connect to cRIO

are you physically connected to the robot?
good battery?
correct network settings?
there are probably more reasons this could come up, but those are the three most common

All times are GMT -5. The time now is 01:53.