Servo Range-of-Motion?
 

What is the range of motion for the servos? I cannot find it anywhere.

Thank you for any help.

Re: Servo Range-of-Motion?
 

I believe it is 170 degees around.

Re: Servo Range-of-Motion?
 

Thank you, although that seems a bit high. Just to clarify, I'm talking about the effective angle you can command it to, not the full mechanical range you can turn it to.

Re: Servo Range-of-Motion?
 

i believe it is 180 and all angles are applicable. we use ours that full range with no problems

Re: Servo Range-of-Motion?
 

180? Okay, that seems about right. However, I didn't think they went quite that far. 170 was my guess. I'll look at ours, maybe there are differences. I can tune it with the camera, anyway.

Thank you for the help.

Re: Servo Range-of-Motion?
 

The standard camera servos are 170, as shown by the centerpoint of 85 in the camera software. Most standard servos are 170 or 180.

Re: Servo Range-of-Motion?
 

I guess I'll use 170 for the angle.

Thank you for all the help.