Running / Turning off a Compressor
 

Hi, we need help with programming a compressor and pressure switch into our teleop code. I am clueless on how to do this and our mentors atm are mechanical ones. Please assist us in this matter. all i need is the compressor to run until the pressure switch triggers. If possible, please post a snippet of a compressor in a teleop code please. Ty

Re: Running / Turning off a Compressor
 

Here's an example: http://www.chiefdelphi.com/forums/at...8&d=1264605003
This code goes in Begin.vi

You'll also want to Close the compressor in Finish.vi: http://www.chiefdelphi.com/forums/at...9&d=1264605002

Re: Running / Turning off a Compressor
 

TYVM from 1793

Re: Running / Turning off a Compressor
 

You might also check out the compressor examples. From the LabVIEW Getting Started Window, click on the word Examples. In the list you'll find:

Solenoid With Compressor Example
Compressor With Cylinder

These examples also show how to wire everything.