Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   343 at week five! (http://www.chiefdelphi.com/forums/showthread.php?t=82856)

cziggy343 16-02-2010 22:08

343 at week five!
 
the robot is in low gear during this session, we aren't actually that slow :D

hanging:

http://www.youtube.com/watch?v=ZHmRrZ9asEo

bump climbing:

http://www.youtube.com/watch?v=KgMxZSGzcIs

kicking:

http://www.youtube.com/watch?v=lPYW0VbjSRM

questions? comments?

GaryVoshol 16-02-2010 22:21

Re: 343 at week five!
 
Wow. What do you have in that bar-grabber? and how does it release after the match?

cziggy343 16-02-2010 22:23

Re: 343 at week five!
 
Quote:

Originally Posted by GaryVoshol (Post 921692)
Wow. What do you have in that bar-grabber? and how does it release after the match?

it is a v-shaped plate that has two spring loaded clips with one-way bearings. and to release, you just tilt it forward to take off the force, then set it on the ground and release the clips :D

phil-1302 16-02-2010 22:29

Re: 343 at week five!
 
VERY NICE!

Akash Rastogi 16-02-2010 22:38

Re: 343 at week five!
 
Yet another great machine from one of MORT's favorite teams.

Was the robot going full speed over the bump in the video?

cziggy343 16-02-2010 22:43

Re: 343 at week five!
 
Quote:

Originally Posted by Akash Rastogi (Post 921708)
Yet another great machine from one of MORT's favorite teams.

Was the robot going full speed over the bump in the video?

no, it is in low gear which full out is about 1/4 of the speed of high gear.

BradMello 16-02-2010 22:50

Re: 343 at week five!
 
Impressive climbing, I like the four bar:)

Alex Chambers 17-02-2010 00:04

Re: 343 at week five!
 
i like how you used the poles themselves to climb, instead of grapaling the top.

Michael Corsetto 17-02-2010 01:44

Re: 343 at week five!
 
Do you have a method of holding the ball to the front of your bot?

brentmcjunkin 17-02-2010 06:53

Re: 343 at week five!
 
Yes we have a vacume we are working on. That will hold it for us.

camtunkpa 17-02-2010 07:32

Re: 343 at week five!
 
Looking good 343! Good luck this season.

the man 17-02-2010 08:11

Re: 343 at week five!
 
what pole are you going to grab on to? They are all 7ft off the ground aren't they?

O'Sancheski 17-02-2010 08:23

Re: 343 at week five!
 
Quote:

Originally Posted by the man (Post 921922)
what pole are you going to grab on to? They are all 7ft off the ground aren't they?

no... the top of the tower is 7ft off the ground... but their are four steel poles to hold the tower up... nice work guys... many teams including us didn't even think of using the support poles for climbing

hipsterjr 17-02-2010 09:10

Re: 343 at week five!
 
Very nice Chris. Can't wait to tear it up with you at Palmetto. Can't wait to see who has more pushing power (which you look to have plenty).

the man 17-02-2010 09:43

Re: 343 at week five!
 
Quote:

Originally Posted by O'Sancheski (Post 921927)
no... the top of the tower is 7ft off the ground... but their are four steel poles to hold the tower up... nice work guys... many teams including us didn't even think of using the support poles for climbing

Thanks that would have been nice to know before desining the lifter all thought i dont think it would have changed our overall desine

Tom Bishop 17-02-2010 11:17

Re: 343 at week five!
 
K. Fire in the hole! woOOOOoooooo.

Love it! Nice job guys!!! Coming to Peachtree right?

Zflash 17-02-2010 12:11

Re: 343 at week five!
 
Looks good 343. Does it go under the tunnel? How far does it kick? I knew you guys would go back to your tank tread days...great job.

Josh Drake 17-02-2010 13:36

Re: 343 at week five!
 
Quote:

Originally Posted by Tom Bishop (Post 922026)
K. Fire in the hole! woOOOOoooooo.

Love it! Nice job guys!!! Coming to Peachtree right?

Headed down to Florida this year. Our height constraint is 17", so we can go under if needed. The design chalenge was to fit the hanger, kicker, electronics, pneumatics, vacuum, and drive train in the 17" high robot. We actually are only 36" long, so we still had room:rolleyes:

Current kicker is only 35 ft. The stronger one got changed for fear of kicking out of bounds.

TD78 17-02-2010 13:39

Re: 343 at week five!
 
Quote:

Originally Posted by DRAKE343 (Post 922121)
Headed down to Florida this year. Our height constraint is 17", so we can go under if needed. The design chalenge was to fit the hanger, kicker, electronics, pneumatics, vacuum, and drive train in the 17" high robot. We actually are only 36" long, so we still had room:rolleyes:

Current kicker is only 35 ft. The stronger one got changed for fear of kicking out of bounds.

Try fitting all of that (minus pneumatics) in a chassis only 30" long.... :ahh:

DarkFlame145 17-02-2010 14:01

Re: 343 at week five!
 
looks great, cant wait to see that at FL...... if there is a webcast

JamesCH95 17-02-2010 14:13

Re: 343 at week five!
 
Can it get hung up on the bump if you're on top and the bot gets turned?

Looks slick though!

cziggy343 17-02-2010 14:28

Re: 343 at week five!
 
Quote:

Originally Posted by JamesCH95 (Post 922160)
Can it get hung up on the bump if you're on top and the bot gets turned?

Looks slick though!

the weight gets unbalanced before it will beach itself. im sure that its possible to get it hung... but its not easy to

MOE 17-02-2010 17:27

Re: 343 at week five!
 
HELLOOOoooo from the NE :D
What a great job you have done on the bot. Love the hanging super effort on this. We at TJ2 hope you have a great year with the bot. Seeeee yaaaa
some place some time. ::ouch::
Moe and Team 88 TJ2 oh yeah ???? OH YEAH !!!! TYE DYE for ever......

JohnFogarty 18-02-2010 10:24

Re: 343 at week five!
 
2 SC robots with treads heheheheeeh the fun begins.

Metalhugginman 20-02-2010 17:21

Re: 343 at week five!
 
Good Luck to my Team. I know you will do well this year. I will be "glued" to the tube, if there is a web cast of the Florida Regional, and definitely at Palmetto on Saturday. :D

Stephen Kowski 20-02-2010 22:07

Re: 343 at week five!
 
can't wait to see it at SC =)


All times are GMT -5. The time now is 00:11.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi