Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Updated LabVIEW and Compressor no longer works (http://www.chiefdelphi.com/forums/showthread.php?t=82975)

HansJ 18-02-2010 09:35
Updated LabVIEW and Compressor no longer works
 
My team updated our LabVIEW software yesterday morning. Our compressor was working the night before. When we tried to run the same code yesterday afternoon, it did not work. Nothing was changed on the robot. Has anyone else had this problem? Our solenoid still works, so the code is running fine.

Any help would be appreciated.

billbo911 18-02-2010 10:00
Re: Updated LabVIEW and Compressor no longer works
 
Quote:
Originally Posted by HansJ (Post 922802)
My team updated our LabVIEW software yesterday morning. Our compressor was working the night before. When we tried to run the same code yesterday afternoon, it did not work. Nothing was changed on the robot. Has anyone else had this problem? Our solenoid still works, so the code is running fine.

Any help would be appreciated.
This appears to be a common theme around here. Search and you will find examples.

In the begin.vi, make sure the relay direction is set to "Both directions".


All times are GMT -5. The time now is 11:09.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi