Wireless Reset Issues and problem resetting
 

So someone on our team decided to reset the gaming adapter, and now we can't go into the router page (192.168.1.1 & 192.168.1.250) and yeah.. If we can't access the page then we can't change the settings from factory settings back to FRC settings. btw since we're a veteran team do we still use 192.168.1.1 even though we reset it o factory settings

Is there anything we can do? we followed the instructions from here-http://usfirst.org/uploadedFiles/Community/FRC/Game_and_Season__Info/2010_Assets/2-2010FRCControl%20System-Getting%20Started-Rev-0.7.pdf

so far we have an eternet cable from the jack to the router. another cable from driver station to router.. we have the gaming adapter connected from the crio to the router... any mistakes?
and yeah no luck.. any help?

Re: Wireless Reset Issues and problem resetting
 

Connect your PC by ethernet cable directly to the Gaming Adaptor.
Change your PC IP address to 192.168.1.5 (make sure the Driver Station application is not running and your wireless is off).
Browse to 192.168.1.250

Re: Wireless Reset Issues and problem resetting
 

Thank you so much, you are the best person in life! oh btw.. do we still use the .250 ip address if we're a veteran team?

Re: Wireless Reset Issues and problem resetting
 

If you have last year's WGA600N, then the default address is 192.168.1.250

If you have a new WET610N, then the default address is 169.254.1.250


You need to follow the setup directions in the Getting started manual for the Gaming Adaptor, so the IP will be reset to 10.26.01.01